1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Installed a 360 cam to my 2021 DCLB Black Lug Nuts for Aftermarket Wheels Radio Switch Plug In HELP LOCKING FUEL CAP/ OTHER THAN STANT 10504. Semi Metallic / Ceramic Brake Pads Interior upholstery color?

3D Tacoma Parts Thread

Discussion in '3rd Gen. Tacomas (2016-2023)' started by smith.p.sean, Sep 29, 2018.

Page 6 of 15
  1. May 24, 2019 at 6:07 AM
    #101
    Btnewman

    #101
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    I printed these a while ago, low profile hub caps to replace all the ones I had torn off in the rocks.

    IMG_20190524_062311648.jpg
     
    Btnewman, May 24, 2019
    #101
    Mr.Hustler, hirod, JimmyRigged88 and 2 others like this.
  2. Jun 18, 2019 at 10:13 PM
    #102
    Btnewman

    #102
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    IMG_20190618_220415768.jpg I will be uploading a series of parts similar to the RAM mounts. Just have a few small changes to make to get everything fitting nice and smooth. I will do ones that also use a small tpu piece to help hold everything nice and tight
     
    Btnewman, Jun 18, 2019
    #102
    Loudog504, Boghog1 and Atl_taco_ like this.
  3. Jun 19, 2019 at 5:48 AM
    #103
    Loudog504

    #103
    Loudog504 Well-Known Member

    Joined:
    Dec 22, 2015
    Member:
    #172854
    Messages:
    937
    Gender:
    Male
    First Name:
    Luis
    Baton Rouge, LA
    Vehicle:
    2017 Tacoma TRD Off-Road 4X4 DCLB
    Anyone happen to have modeled these little clips? Lost a few in the meso puddle install =)

    31BDBbHAuPL._SX466_.jpg
     
    Loudog504, Jun 19, 2019
    #103
  4. Jun 19, 2019 at 6:21 AM
    #104
    Skydvrr

    #104
    Skydvrr IG: @kalopsianick

    Joined:
    Sep 13, 2017
    Member:
    #229889
    Messages:
    12,654
    First Name:
    Nick
    YMH
    Vehicle:
    Black '17 OR

    They're still in your door. Pull the plastic back and reach in. They're at the bottom
     
    Skydvrr, Jun 19, 2019
    #104
  5. Jun 19, 2019 at 6:54 AM
    #105
    Loudog504

    #105
    Loudog504 Well-Known Member

    Joined:
    Dec 22, 2015
    Member:
    #172854
    Messages:
    937
    Gender:
    Male
    First Name:
    Luis
    Baton Rouge, LA
    Vehicle:
    2017 Tacoma TRD Off-Road 4X4 DCLB
    Cool, I'll pass that info along. I was going to print for a buddy that lost his. Toyota wanted $4 bucks a piece lol.
     
    Loudog504, Jun 19, 2019
    #105
  6. Jun 19, 2019 at 6:59 AM
    #106
    Skydvrr

    #106
    Skydvrr IG: @kalopsianick

    Joined:
    Sep 13, 2017
    Member:
    #229889
    Messages:
    12,654
    First Name:
    Nick
    YMH
    Vehicle:
    Black '17 OR

    Tell him to pull the speaker actually, 4 10mm bolts and an electrical connector. Way easier.
     
    Skydvrr, Jun 19, 2019
    #106
  7. Jun 19, 2019 at 8:35 PM
    #107
    MGM_Grand

    #107
    MGM_Grand Well-Known Member

    Joined:
    Mar 22, 2019
    Member:
    #287558
    Messages:
    122
    Gender:
    Male
    Denver, CO
    Vehicle:
    2017 MGM DCSB TRD OR
    Any chance these are on Thingiverse yet? Did you use PETG to print?

    I'm working on an insert for that rectangular "cup"holder, that would have modular inserts. Trying to make one for my Baofeng HT, will make another that holds coins, etc.
     
    MGM_Grand, Jun 19, 2019
    #107
  8. Jun 20, 2019 at 12:15 AM
    #108
    JimmyRigged88

    #108
    JimmyRigged88 Well-Known Member

    Joined:
    Feb 28, 2018
    Member:
    #245842
    Messages:
    301
    Gender:
    Male
    WA
    Vehicle:
    2020 JLUR
    No I completely forgot. I'll get it uploaded and share here. I printed them in abs
     
    JimmyRigged88, Jun 20, 2019
    #108
  9. Jun 25, 2019 at 6:55 PM
    #109
    SgtPuddin

    #109
    SgtPuddin Well-Known Member

    Joined:
    Apr 8, 2018
    Member:
    #249851
    Messages:
    660
    Gender:
    Male
    Mississippi
    Vehicle:
    2018 Tacoma TRD Off-Road DCLB
    KO2 Ray10 5100’s 884’s Rx350 Retro Headlights
    Im the one that lost them in the door. I pulled the plastic back and the speaker and no lie I think they vanished like a fart in the wind. I used some thin Velcro and it did the trick. $4 a piece for those clips, I laughed out loud when she told me that.
     
    SgtPuddin, Jun 25, 2019
    #109
  10. Jun 25, 2019 at 8:51 PM
    #110
    Btnewman

    #110
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    If you can get me a good straight on photo of one, and some of the basic dimensions, I should be able to get them drafted in no time
     
    Btnewman, Jun 25, 2019
    #110
  11. Jun 28, 2019 at 4:26 AM
    #111
    Btnewman

    #111
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    For you ham guys that don't want to keep your radio displays on the dash while not in use, I drafted a little 1" ball to keep the wire and connection in place.
    Goes into a 1" Ram mount.

    IMG_20190627_185536751.jpg
    IMG_20190627_185545555.jpg
     
    Btnewman, Jun 28, 2019
    #111
    reymataco, Velequez, hirod and 3 others like this.
  12. Jul 10, 2019 at 7:35 AM
    #112
    Btnewman

    #112
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    Printed out a backing box for a 4 switch panel to mount in the bed. Has a fairly water resistant wire entry guide on one side, and in case water does get in, there is a bit of a drain tube on the bottom. Slightly way over enginerded...IMG_20190710_093147872.jpg IMG_20190710_093502395.jpg
     
    Btnewman, Jul 10, 2019
    #112
    reymataco, Jeff Dartfrog, trabo and 6 others like this.
  13. Jul 10, 2019 at 8:09 AM
    #113
    toku58

    #113
    toku58 Well-Known Member

    Joined:
    Oct 10, 2008
    Member:
    #9882
    Messages:
    2,534
    Gender:
    Male
    On a Rock in the middle of the Pacific
    Vehicle:
    Mall Crawler!
    21' TRD OffRoad 2" 887 OME on Bilstein 5100's. 285/70R17 General Grabbers G3 17x8.5" Icon TRD wheels (Gun metal gray) 4.75" BS
    How about just making a nice beefy T style shifter handle? I really hate these shift knobs.
     
    toku58, Jul 10, 2019
    #113
  14. Jul 10, 2019 at 8:49 AM
    #114
    xerogs1

    #114
    xerogs1 Well-Known Member

    Joined:
    Jun 27, 2019
    Member:
    #297609
    Messages:
    291
    Gender:
    Male
    First Name:
    Chris
    New Mexico
    Vehicle:
    2019 TRD OR DCSB AT Silver Sky Metallic
    Bartact Seat Covers, Cali Raised LED molle bed system, radio knobs and Subaru Tweeters, OCD interior parts, OEM Exhaust tip, dash cam, hood protector, various theft deterrent items. Still a WIP
    A few years ago at SIGGRAPH there was a prototype company that specialized in 3D printing and their finishing techniques were top of the line to the point where it was difficult to tell what was a machined and painted part VS 3D printed and painted. If you are into finishing this blog post has some good tips on how to do it.

    How to Finish Your 3D Prints
     
    xerogs1, Jul 10, 2019
    #114
    trabo likes this.
  15. Jul 10, 2019 at 9:03 AM
    #115
    lapoltba

    #115
    lapoltba Full Bridge Rectifier

    Joined:
    Aug 28, 2014
    Member:
    #137089
    Messages:
    3,346
    Gender:
    Male
    CT - 06076
    Vehicle:
    '17 Sport, ACLB, V6,MT, 04B14 OV-Tuned
    Protolabs is pretty damn good too. Not necessarily cheap, but they can do pretty much any process.
     
    lapoltba, Jul 10, 2019
    #115
    xerogs1[QUOTED] likes this.
  16. Jul 10, 2019 at 9:20 AM
    #116
    lapoltba

    #116
    lapoltba Full Bridge Rectifier

    Joined:
    Aug 28, 2014
    Member:
    #137089
    Messages:
    3,346
    Gender:
    Male
    CT - 06076
    Vehicle:
    '17 Sport, ACLB, V6,MT, 04B14 OV-Tuned
    Speaking of which... does anyone have any interest in the center switch panel for the overhead console? They end up being $27/each ordering 10 at a time when using their multijet process. It would require painting afterward.
     
    lapoltba, Jul 10, 2019
    #116
    Smashing likes this.
  17. Jul 10, 2019 at 9:26 AM
    #117
    Btnewman

    #117
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    I went this style so I can have room inside to wire up about 6 buttons to control outside lights and accessories. Trying to keep it rounded as possible as I am not a huge fan of t-style handles.
    To each their own
     
    Btnewman, Jul 10, 2019
    #117
  18. Jul 10, 2019 at 10:13 AM
    #118
    ilubtimmyhos

    #118
    ilubtimmyhos Brewer

    Joined:
    Oct 13, 2016
    Member:
    #199650
    Messages:
    3,637
    Gender:
    Male
    First Name:
    Adam
    Haymarket, VA
    Vehicle:
    2012 Blue Tacoma 4x4 Pre-Runner
    4x4 Conversion w/ FJ T-Case, King 2.5 Extended Travel Coilovers w/ JBA UCAs, King 12" 2.0 Smoothies w/ BAMF relocate in the rear, OME Dakar leaf pack, 4.56 gears w/ ARB air locker, Archive Hammer Hangers w/ crossbar brace, ARB Snorkel, Custom Bed cap w/ Roofnest Sparrow XL, Retrofit Headlights, Wrapped in 3M Satin Perfect Blue
    Anyone have any cool files for a 2nd gen?
     
    ilubtimmyhos, Jul 10, 2019
    #118
  19. Jul 10, 2019 at 12:30 PM
    #119
    Btnewman

    #119
    Btnewman Benjamin Newman

    Joined:
    Apr 15, 2011
    Member:
    #54950
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Benjamin
    Grand Junction co
    Vehicle:
    Uh. It's beat to he//. But it's only 1 owner.
    Custom body work/damage ARB rear locker Bumpers Shocks Other parts Tires and Rims Air tank fully plumbed into truck "Golf ball mod"
    I am second gen, but post here, what are ya looking for?
     
    Btnewman, Jul 10, 2019
    #119
  20. Jul 10, 2019 at 8:34 PM
    #120
    ilubtimmyhos

    #120
    ilubtimmyhos Brewer

    Joined:
    Oct 13, 2016
    Member:
    #199650
    Messages:
    3,637
    Gender:
    Male
    First Name:
    Adam
    Haymarket, VA
    Vehicle:
    2012 Blue Tacoma 4x4 Pre-Runner
    4x4 Conversion w/ FJ T-Case, King 2.5 Extended Travel Coilovers w/ JBA UCAs, King 12" 2.0 Smoothies w/ BAMF relocate in the rear, OME Dakar leaf pack, 4.56 gears w/ ARB air locker, Archive Hammer Hangers w/ crossbar brace, ARB Snorkel, Custom Bed cap w/ Roofnest Sparrow XL, Retrofit Headlights, Wrapped in 3M Satin Perfect Blue
    Not exactly sure. I recently got into 3D printing and there are a bunch of random cool things for the 3rd gen but almost none for the 2nd. Just looking for things to mess around with for my 2nd gen or for my wife's 5th gen 4runner
     
    ilubtimmyhos, Jul 10, 2019
    #120
Page 6 of 15

Products Discussed in

Rexka 30pcs Door Garnish Moulding Retainer Clip Compatible with Toyota Lexus 67771-58010 Tundra Tacoma Sequoia RAV4 Land Cruiser Highlander C-HR Yaris Scion xD
$7.99
To Top