What Have You Done To Your 3rd Gen Today?

You may want to try this:
https://www.sonicelectronix.com/item_135721_Cerwin-Vega-VPAS12.html
Sub, amp and enclosure all in one. Just need a wiring kit to install.
I put it in mine and fine it works good.

 

Easy install and lights work! License lights are toughest. If you reach underneath the bumper and press on the side of the back and have a tool on the front to get in between cover, it will pop right out. As far as the map lights, I found it easiest to pop the console entirely out and replace the bulbs that way and pop consule back in. Overall took me 15 mins to do everything and it is very bright! Here is the link in case you want to know cost and how much: Frye Flys https://www.amazon.com/gp/product/B07KRNFQF6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Up next: Hella H9 https://www.rallylights.com/hl78178-h9-12v-65w-xenon-bulb.html

 

For maps I just put duct tape on the bulbs and they pulled straight out. Never had to drop the console.

 

Tried that but the way the bulbs are wedged in there and when I took them out once console was out seem like they had a bracket holding them making it more difficult to remove with just tape. But hey, whatever works!

 

Been a few years but I do recall using small needle nose pliers over the tape on one bulb.

 

yea. I tried that as well but I didn't want to break the bulb off. But now they are crazy bright!

 

Thanks

 

No it's not, their being lazy. Did you show them the Read Diff Howl TSB? I forget what number it is.

 

Looked it up and damn I like it. I might go with that.

 

We had a pose down.....each got the spa treatment during the last week. FJ got it today, much needed wax as well.

Back into the garage they go for now.

 

Thanks @no vtec 4me and @rtw07 for the headlights!










Rx350 and the BHLM. Love them!

 

Nice man, you got a great deal!

 

Currently installing this beast. Holy moly did not expect this much cutting but too late now

 

Today’s project.. Supreme Suspensions level kit for the taco. 2inch spacer up front with a 1inch block in the rear. I’m very satisfied with the outcome. Just need some bigger shoes and rims next!

 

New wheels and tires going in soon! Also Going from bfgoodrich K02 to KM3!

Help me choose my next wheels!!

ALSO! Vtx and I linked up to giveaway a BRAND NEW set of VTX wheels too!

I want to thank the admins and everyone for all your support! ❤️

https://youtu.be/pMqdyNaj4B0

 

Debadged and Plasti-dipped today

 

Where'd you end up cutting from the back, between the the lens and housing or just into the housing? You have any pics on what you did? I just got an extra set in so I'm gonna attempt this...

 

I pity the deer that crosses your path! You got it covered...

 

Just got done installing my retros from @no vtec 4me

Along with some meso side markers and filler plates.

 

And they have arrived!




So now I need to get them coated before I can put them on. I have a couple quotes that are wildly different, so I thought I'd ask y'all if you don't mind sharing the ballpark for what you've paid to get your sliders coated. Keeping in mind these have the additional step plates, but I can't see that increasing the price too dramatically.

I'll be doing a flat black, simple power coat, don't need anything other than corrosion resistance really.