installed fog lights

i installed fog lights...and when i was removing front panel under steering wheel. to install off/on switch...i noticed i was missing a panel screw. see pic! can anyone tell me size? to go buy at lowes, etc....its a 10mm but what threads????

 

M6x1.0
Doubt Lowe’s will have flanged bolts.
I’m always under the dash so I leave mine off.

 

thats the left one top of the kick panel???

 

Correct. Most 10mm are the same thread size and just the length differs.

 

thank you.... the reason I ask is because the two screws to the right are different threads

 

Yes the right side is a coarse thread black screw with 10mm head.

 

siblue...6mx1.0x ???
most say 6mx1.0x20 or 30 etc
or is that the length???

 

That’s the length

 

once again thank you

 

well...finished my foglights...bought a simple off/on switch. until i can order a toyota push button. for those who need bolts LOWES sells m6×1.0 tapered bolts....

 

What fog lights did you install?

 

after market foglight that fit oem front bumper holes....put 3000 lumen leds in each one. my SR model didnt bring any fogs.....

 

M6 is the diameter(6mm), 1.0 is thread pitch (threads per mm), x length in mm's. Wrench size for that bolt is 10mm.

 

still daylight

 

right on bro!

 

well see how the hold up aftermarket foglights...later on if i can buy oem foglight housing i will buy. wired main power from relay directly to engine fuse box (constant power) with 15 amp fuse and 2nd power on to switch i bought (off/on) wired to inside fuse box via add a fuse (10amp) controled by ignition! "NO constant power" unless ignition is on! that way when engine turns off so does foglights!

 

Was your truck prewired for the fog lights?

 

no...had to run new wire/fog light kit...