DFW RC - Home of BYSRacing

Excuse my ignorance but do you add brass as weight and do you only add it as unsprung?

 

Yes, add brass to get the weight balance of the car for the type of trails you hit, typically low and wide is best for any weight. Balance front to rear is best, ive loaded the front of mine down, it climbs well but struggles on steep descents.

 

If u have an scx10.2 with stock axles i have extra brass knuckles and brass link mounts id sell at a discount.

 

Yup - im about to get a root canal, like in a few mins

955 dollars. Fuck. My. Life.

 

Extraction now, 2800 bucks this fkin sucks.

 

That’s a lot of RC’s.... better think this through!

 

Its done, its out fuck that was rough

 

Just checked wheelbase and it’s about 12.56” with my custom link setup. She sure does climb for some baldies!

 

No building for me, im on the good drugs, gon pass out

 

John you need to show this to Caleb... they are not RGB so he may not be interested. haha

Partsam Truck Bed Light White LED Strip Tailgate Light Bar 2pcs 60" 90LED Waterproof Brake Reverse Running Light with Switch Fuse Splitter Cable Replacement for RV Pickup

https://www.amazon.com/dp/B018934EUG?ie=UTF8&psc=1

 

yeah you need some new tires bro

 

To replace the ones y’all half assidly installed already?

Not yet. Y’all need any advantage y’all can get to try and keep up with this scale rig.

 

Well first off... i just did what caleb wanted as far as wiring, he did all the light placement and mounting.

2nd, they were not waterproof and he knew it so im suspecting that was the cause.

3rd.... All of my lights on my truck still work, and they have been installed for years.

4th... you want to make some extra money on Friday morning?? ~$50 I have a guy that wants me to run wires for some light on his truck, he wants to drop it off friday morning.

Below is what he wants... Should be pretty easy...

wires ran for rear bumper lights
wires ran for front bumper 30" bar
wires ran for front ditch lights
front ditch light bracket install
ditch light mount
interior switch plate install
switch harness wiring

This is what he has purchased....

1. This is the switch panel that the front bumper light bar, ditch lights, and rear bumper light pods will terminate to.

2. I have 3 of these switches - For front bumper light bar, ditch lights, and rear bumper light pods, and will terminate in the panel on item #1



3. I will be using my stock fog light on/off switch on the truck. This requires these two plug's since I will use stock switch and aftermarket fog lights


4. Dual Leg Wiring Harness


5. Single Leg Wiring Harness

 

Pictures aren't displaying

 

Switch panel install is going to be easy AF
https://www.youtube.com/watch?v=Qk9NpKv1M2Q

And he bought harnesses so i just need to run it and zip tie it up, and connect the battery terminals.

 

Electronics are on, havent started on body yet.

This panhard setup is kinda lame, maybe i didnt do it right tho

 

Did you try using your brass SCX knuckles or would you need different C Hubs?

 

Didnt try, would loose BTA steering if i use em.

 

Oh, I guess I was thinking they might've worked in the BTA orientation, but can understand why they wouldn't after further thought. Steering link from the servo still goes in front of the axle, right?