Driver's door tap for power info.

For those adding puddle lamps, switch back turn signals, cameras, etc. needing power source near the install, here are a few choices without running wires to the cab fuse box or all the way to the engine fuse box.

Connectors at the driver's door:

Connectors with fused juice to parallel to.

Details:

Not much to vamp out but always hot.


Only on vehicles with Power Window Jam Protection.

 

Passenger's

No Power Window Jam Protection...
3M T taps, etc. or something like this...

@KTJO 4x4 could supply the crimped Y wires...

 

Thank you for your reply, but I have the cargo lamp schematic I need, and the junction , and ckt, just have not tried to see whether the harness itself, is a pass thru design or stops at A Pillar post and becomes a junction block with terminals etc. Am hoping it is the old pass thru design so I can thread the harness from the projector assembly to get a Power On when doors opened with cargo light coming on. But I do appreciate the reply, J White OK< now I see more items loaded in your reply, and it shows what I had hoped for , Very Helpful, thanks !