Cab Mount Chop

Hello everyone, I plan to install 285/75/R16 tires on my 2nd gen Tacoma trd offroad this Friday, However I did not purchase a cab mount chop plate. I plan on cutting the cab mount this Friday and welding it up later next week. Does anyone have a dimensioned sketch of what the CMC plate should be?
Thanks,
Evan C.

 

Not all Tacomas will require a CMC with that tire size depending on lift.

 

I am running Bilstein 5100s with ome 887x coils (2.5" lift in front) with a deaver aal in the rear (2" lift in rear hopefully) I also have JBA UCAs
factory trd offroad 16" wheels with spidertrax hubcentric spacers

I don't want it to rub at all when at full lock with tire stuffed.

 

Personally, I would wait and order a plate either from Relentless or BAMF and use it as a guide but maybe this thread may guide you:

https://www.tacomaworld.com/threads/cab-mount-chop-too-aggressive.137469/

 

My tires have to get put on this weekend bc the ones I have atm are dry rot bad and are about to go. So if it rubs after tires this weekend than ill have to do it.