King remote resi mount location

Curious how other people with king resi coilovers mounted their reservoirs if they have aftermarket front bumpers? For example I have an arb front bumper that has a brace extension that bolts further back to the frame , and it's on the edge of where the resi bracket is supposed to go. I don't have a sway bar to worry about so I think I could either A) leave it not fastened all the way in, there's about an inch gap between frame and bracket. Or B) cut up the brackets to fit the bumper frame bolt. Has anyone encountered this issue before? I saw a picture of an icon resi bracket that was cut to fit the bolt but the mounting brackets are a little different.

 

Just notch out the resi mount and bolt it in to the sway bar bolts like designed. That's what I did. Let me find a pic.

 

You can sorta see it here.

 

Awesome, thank you very much for the quick reply and picture!!

 

Now we a similar solution for my FOX resi brackets.

 

I did the same. But now they’re cracked through

I just bought the BAMF bumper reinforcements and won’t have that clearance issue anymore. But now I. Red to buy a new set of reservoir brackets and I haven’t found them for sale yet

 

Get icon resi brackets @Gary99 can post a pic here

 

Yah the icon resi brackets will work becasue they are a flat design. I drilled a hole through it.

 

Nice setup

 

How is the icon resi bracket holding up? Is the sway bar spacer as beefier as the king one?