285's

Alright so I getting ready to pull the trigger on some new wheels and tires. These are the wheels I'm thinking about,https://www.discountedwheelwarehous...m=Base+4WD&vid=49471&t=O&lt=Levelkit&pid=4398 they are on the cheap side, but I think they're fine. Now the problem is tires, I'm really wanting to get 285's. I'm not entirely comfortable with cutting, but worse case scenario I ask the local mechanic to cut some, he does lifts and all sorts of stuff so idk why not. Is the bs and offset on that wheel enough for 285's? Also, I have stock uca's. Is that something I have to upgrade right away, or can I keep stock and upgrade later? Thanks for help! (truck has 2.5in lift in the front, 1in rear)

 

How much lift are you running? When you say 285s , what’s the exact tire size?

 

Just saw 2.5” lift. If you going 285/75/16 gonna be close. Should be fine on the uca for rubbing, probably have to do some trimming on the flares. Good luck.