Level question

i have a 15 TRD off-road and it has a spacer lift on the front now because whoever had it before I did had installed 285’s. I am going back down to 265’s but I wanted to install a spacer to level the front out and didn’t know what size I needed. The one that is on it now causes the front of the truck to be higher than the rear so I wanted to change it out. Thanks everyone

 

Is there any lift in the back? A block or aal that you noticed?

 

Post clear picture(s) of the front spacer lift and the rear leaf spring showing the ubolts.

 

No lift in back. I had bought some Toytec blocks for the back and installed them and then had a vibration from 0-20mph and then a bad one between 50-60mph. I didn’t do a carrier bearing drop or anything I just figured I would take it out and go back down to 265’s when I got new tires. But when I bought the truck the spacer lift was in the front. But I can take pics and post if I need to.

 

The thickness of the front spacer multiple a factor of two is usually the amount of lift the spacer is giving you- ex. 1.25" spacer is equal to about 2.5" of lift