3rd Gen Tacoma Fire Extinguisher Mount

Hey everyone!

Here is what I came up with for my GFs 2nd gen Tacoma. It would fit the 3rd gen too.







The bracket bolts to the seat frame itself and is 12 gauge steel. The final product would be powder coated black. Unfortunately because the seat adjustment bar is so low, I had to design the bracket with enough room to reach the bar. I also added in two different locations where adjustments can be made to provide more space to grab the bar. The bracket can slide outward about an inch from where it is in these photos and it can also tilt forward to make more space. I have no problems getting my hands in there even at the tightest adjustment.

It works for both sides as well. I also have a strap mechanism that allows you to strap MOLLE pouches or anything with a belt clip to the bracket as well. In my land cruiser, I have the fire extinguisher on the passenger side and a couple MOLLE pouches on the driver with my stuans, tire gauge, gloves, etc.

Let me know what you guys think.

Thanks!

Rami

P.S. Mods, if I need to be a vendor for this, please PM the info so I can sign up.

 

Very cool idea, but you need to post in the bst section, and have to meet a few requirements first (like 50 posts). I recommend editing the post because they like to hand out temp bans for rule violations.

 

Thanks for the heads up.