1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

play in steering wheel

Discussion in '2nd Gen. Tacomas (2005-2015)' started by tammikm, Aug 18, 2019.

  1. Aug 18, 2019 at 5:41 AM
    #1
    tammikm

    tammikm [OP] Well-Known Member

    Joined:
    Jul 14, 2007
    Member:
    #2090
    Messages:
    406
    Gender:
    Male
    canada
    Vehicle:
    06 DC 4x4 SR5 AUTO
    n/a
  2. Aug 18, 2019 at 12:24 PM
    #2
    Muddinfun

    Muddinfun Well-Known Member

    Joined:
    Apr 17, 2017
    Member:
    #216500
    Messages:
    7,489
    The proper way to check all types of steering linkage takes 2 people. Leave the truck on the ground. Have your helper wiggle the steering wheel back and forth. Put your hand on each joint and feel for play. For the inner tie rod ends, squeeze the bellows and feel the joint inside. If there is looseness, you will feel it between the ball and socket. This also works for steering shaft U joints and rag joints. Finally, feel between the rack housing and the frame to check the rack bushings. You will need to tell your helper, "a little more, a little more, a little less, etc."
     
    Drburn1718 likes this.

Products Discussed in

To Top