Lightbar switch wiring

Hello,

TGIF, just tackled the tweeter upgrade and still find it irking that I haven't correctly hooked up my lightbar switch. I was hoping some wiring gurus can help a noob out. I have a Nilight switched hooked up but it doesn't fit in the hole...

I have a Cali raised switch that only has 4 wires and I can't get it hook properly where it illuminates when off.

Any guidance is much appreciated, it's been hanging like that for 6 months

 

Try looking at this thread

https://www.tacomaworld.com/threads/wiring-up-caliraised-leds-w-oem-switch.514284/

 

search caliraised on youtube, there is a video showing the proper wiring.

 

On the calirasied wire harnes to your lights, the black is ground the green one connects to the white the red connects to the blue and the red next to the black will tap into a fuse to work with your lights (i used an add a fuse and tapped it into the taillights)

 

There are two red with yellow stripe wires. The one next to the green wire (at the connector)(not pictured) gets spliced to the blue wire from the light bar.

 

Thanks everyone!