3rd gen and LED Tail Light issue

So recently ordered some LED Tail lights off ProTuningLab. They came with resistors and I didn’t think I would have to splice them to the turn signal wire. I did one at a time as a did before with front signal bulbs. I noticed however the resistor had a green and a black coming from the LED housing, a plug and then a black and blue that went to the resistor. I used some quick splices to the green and black. Still had hyperflashing, then I noticed the running lights weren’t, then I immediately got the dreaded Brake Override message. Somehow my 10Amp taillight fuse blew, replaced it and put the stock tail lights in. Is there anything I did wrong? Normally the resistor and all is a pretty easy task