Colorado Trading Post

I'm interested if it is the correct size. What condition is the material in? I know you said there were a couple small holes, but is the rest of it all sun baked/dried, or is it still pliable? Zipper in good condition?

 

$900 this week only, then it’s going into storage. ARE Overland topper for 3rd gen Shortbed, MGM.

Colorado Springs

 

The rest looks good. Zipper works great

 

Pelfreybilt standard rear bumper for 05-15, powder coated, swingout with dual jerry can holder. It's about 1.5 years old and in good shape. I'm planning to sell the truck and am getting rid of parts. It has 6000 miles worth of cross country dirt road grime on it but will be cleaned before selling.

$1000 and your stock TRD OR bumper/hitch assembly. Located in Colorado Springs.

 

If only this was a high clearance!

 

1st gen t-case parking brake

https://www.tacomaworld.com/threads/t-case-parking-brake.626333/#post-21410275

 

My 1st Gen SnugTop used the same kind of clamps, with which I had no problems for the 8yrs I owned it.

 

Yep, The Jarhead Rule! I was only half serious and thought you could handle it.

I think we do a good job in here, the rules are just to prevent rip off's and most new folks (Category I would put the rip off artists) don't post up much for sale. I remember going to the Texas for sale section where all rules were enforced and it was mostly deleted posts for not following said rules.

 

can I request more photos?

 

http://bayareametalfab.3dcartstores...er-05-to-15-only-Steel-NO-SWINGOUT_p_119.html <-- This with swingouts. (It probably isn't what you want, but does give you an unobscured view of the base bumper itself...)

 

Yep, anything specific or just more?

 

like to see the swing out from the rear and side and with the tailgate down please

 

Guerrilla Gravity Megatrail / Shred Dogg
This bike can be setup up as either model. Short stroke it with a 230x57.5 for a Shred Dogg or a 230x65 for a Megatrail.

While the bike has Shred Dogg decals, it’s built as a Megatrail

Medium Frame
Purple Drank powder coat
Fox 36 170mm Grip2
DHX2 230x65 - w all the knobs
XT 11 Speed with e13 Cassette
XT 2 piston brakes
Turbine cranks
SDG Tellis 150mm with bikeyoke lever
Industry Nine A35 Stem - 40mm
Next R bars cut to 760mm
I’ve tech rotors 203 and 180
Chromag saddle NOT included - will come with SDG saddle

Industry nine hubs and spikes laced with We Are One Agent wheels (27mm ID)

$3700

 

Trying to say something with your post?

 

$20 or a 12er of Drumroll APA or similar

 

1st gen short bed plastic liner - FREE (hell I'll probably give you a beer or two to take it...)

I cut up part of the driver's side front corner a little bit for a stupid antenna bracket that was dumb.

 

[SOLD]

Anyone interested in an ATC topper? It’s for a 2nd gen short bed. It’s got Yakima rails, towers, and cross bars with keys for the towers and back window. Reinforced roof, sliding front and side glass all in good shape with a carpeted interior. Currently a faded black as it was on a truck from Arizona and the paint is fading and cracking so it will need to be sanded/repainted. I got this to color match super white and use with my RTT but I didn’t like having the tent up that high so I went with bed bars instead and now need it out of the garage. Located in Denver, asking $350.

 

Hi Dan