Help with cam gear install

Hey, folks.

I got the UCON EMS, and am working on removing the head covers. I’ve run into trouble removing the passenger side due to this assembly here:



Anyone know how to proceed?

 

Gonna have to remove the secondary air pump pictured. There are two bolts that are visible in the pic, then on the back side of the pump there are two bolts where the piping goes into the pump. Then i also think there are a couple bolts under the pump near the passenger side exhaust manifold/header

 

It also helps to remove the studs so you have more flexibility to get the pump in and out. I highly recommend doing this, saves lots of time

 

Thanks for the reply--I managed to get the pump off. At the time of the photo, I had found all of the bolts you mentioned except for one bolt hiding underneath. I couldn't see it from up top, but had an easy time finding it from the wheel well.

Thanks again!

 

Sure thing, glad you were able to get it sorted

 

So how you dig the kit?