Need technical assistance

had a squirrel chew my main wiring in half. Wired it back up everything worked perfect till I backed up and wrapped all new wires around 4 wheel drive shaft. Two days later I thought I had everything wired back up but when I tried to start it the engine turned over normally but wouldn’t start. Something wired wrong. Like it’s getting no fire or no gas.what wires could be backwards to cause this? Does the fuel pump wire go through here? Don’t know what wires go where just tried to hook them up by color.1996 Tacoma 6 cylinder 4 wheel dr. Any suggestions would be appreciated..

 

Welcome to The Forum!

Please revise your thread title to reflect you are in need of technical assistance. We try to reserve "HELP" for folks who are broke down on the side of the road or stuck out in the middle of nowhere.
Thank you and good luck!

 

Pretty sure the fuel pump works in symphony with a the crank position sensor. It wont turn on until it sees a certain rpm.

Good luck, i hope u have a manual

 

Is the wiring harness the one that goes to the tail lights?
Sending you a Private Msg.

 

The wires running above front drive shaft

 

I got side tracked and forgot to PM you sorry.

 

Did you check all the fuses? When the wires wrapped around the drive shaft maybe you had a short and blew a fuse.

 

No fuses blown I can find

 

I got no pm

 

sent you a pm.

 

Where do I find it? It’s still not getting fire . Spent most of day on it.

 

Scroll to top click on inbox. I attached a file to my message. Download it.

 

Thank you