98 Taco weird transmission mount

I am in need of a tranny mount that the parts stores say doesn't exist. The part that low range off road sent is too big by a lot. It is a 98 Tacoma 4X4 with the 2.7 with 5 speed. I can't have the only one in captivity, surely someone else has run into this.

 

I had the same issue when I did the rebuild on my transmission and put new mounts in everywhere. My final solution was to buy an OEM mount direct from toyota. There's a local (sorta) shop to me that specializes in toyota rebuild called Yotashop, they sell online as well. Either way The part number is
12371-75030

 

Thanks a bunch. I been running in circles trying to find this.

 

Well dang it that didn't pan out as 12371-75030 says is for a 4 runner and a pick up uses another mount . Even tried a local Yota dealer and he said can't get one. I did stumble across another spot that said used 12371-0C020 but it looks totally different. The 12371-75030 looks to be the closest by the picture. Out of desperation I ordered it and if nothing else will see if can modify if need be.

 

That's really weird... if it's any consolation I took the motor and transmission out of a 98 4runner (it had the 4cyl in it) rebuilt them and put them in a 98 tacoma. I used the transmission crossmember that was already in the truck, I've put 100 miles on the truck since then and nothing has ripped itself apart yet!

 

Here's a snap shot from that yotashop.com place I was telling you about

 

My 1995 4x4 2.7 also has this problem. No aftermarket manufacturer makes the mount. Have to get OEM.

Mine was:
12371-35080

Use this site and type in your VIN to make sure. www.Partsouq.com

 

Take a picture of what you have.

Could be almost any mount in a truck that old

 

How do you add a picture? From what have found so far it looks closest to a 4 runner mount. All the ones that Orileys and Autozone had were not even close. I went to the dealer with VIN in hand he said couldn't get it. I am not sure what the history of this truck is as I got it 3rd hand at least and maybe more.

By the VIN on that site Russianman 92 mine comes up as 12371-0C020 which looks nothing like what I had on there.

 

OK think got it so will show.

 

That looks exactly like what I installed in on my truck, they look just like each other


EDIT @Trapperpete52 sorry no they don't look the same, I see the new one in that picture is wider. My apologies,

Do you know if you have the W59 5speed in the truck?

 

Will find out in a few days as I have one on order.

 

OK finally found a part number on it cast into the rubber 12371-0C020. Seems can only be found on a yota site and is around $130 plus shipping.

 

https://www.ebay.com/itm/S260-Fit-1...a=1&pg=2060778&_trksid=p2060778.c100290.m3507

Found one that works even though Toyota said not available any more.

 

That's odd that Toyota said that. I got mine from the dealer a year ago.

 

That was my thought as well. I think he was more interested in his texting that I interrupted then looking for a part. That was in Oxford, MS.

 

Eye opener found NOT to deal with Low Range California Inc . I verified with their staff before ordered a mount and even sent them my VIN as well. Had to return it on my dime then they finally did a refund minus another $19.90 on top of the $25.85 I had to pay to ship it back to them.

 

Low Range is owned by Trail Gear.