Dome Lights

Hi everyone,
any tips or tricks on how to replace dome lights? I have order the led lights to replace outdated oem. Thank you

 

Meso lights or just bulbs? Basically just pop the lens off and replace bulb. I know some LED are polarity sensitive, so if it doesn't work when you put it in, flip it around and try again. (Insert a "that's what she said" here)

 

https://www.tacomaworld.com/threads/custom-led-map-and-dome-lights.521923/

MESO products for the win

 

ok. What about for the part with 2 turn on vanity lights by the sun glass pop out holder?

 

Just look up some YouTube videos, some videos show replacing all lights including vanity

 

Thank you everyone for your help. Have a good rest of your day!

 

I have this on the way today,
yes the 2019 have really bad interior lights, I can not see much , in there after dark.
https://www.amazon.com/gp/product/B07KRNFQF6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

Let MESO Light your way
May you never be LED astray again.

 

I ordered the LED map and dome lights from a guy on here but the dome was too blue and didnt match the maps. Went down to Autozone and the dome light they had matched perfectly. Super bright and actually white.

 

I’ve had that happen. Before I knew what color temps to look for, anything over 6000k is too blue for me. 5500k is a good color

 

Be careful of the overhead light. There are several sizes of bulbs and if you get one that's mm longer it's difficult to get in. Also make sure there's no power to the fixture when you do this installation. If you short one end of the bulb against the frame (easy to do) with the power on it can blow out the fixture. As me how I know.

 

Disconnect the battery first!!!