Colorado Trading Post

Soon I’ll be putting in an order for 1st gen double cab.

 

2018 off-road stock tires/wheels
Taken off at ~20k
Sold

 

BUMPING my supermoto

 

The TJM is not enclosed right? Does it have a cover?

 

Not mine.
Saw this in the Facebook Marketplace, pretty cool I would buy it but it won't work with my Leitner.

 

Exactly the same as an ARB without saying it’s an ARB.

http://www.tjmusa.com/es/product/tjm-awning-20-meter

 

I checked into those once before.. they do not work if you have bed stiffeners i the back.

 

Flawless 2016 Toyota Tacoma. Will Give TW discount to $27,000 Very low 39k miles with 3 inch lift. V6 Automatic DCSB 4x4 Sr5 trim with recently installed TRD off-road suspension. Brand new 285/70/17 fallen wild peaks, new 15%tint all around. New alignment less than 500 miles ago. Absolutely nothing wrong just found a new truck. Price is pretty firm no low ballers. Any questions please let me know. Im willing to deliver the truck with a deposit. Im located in Vail but can come to denver for serious buyers. I have clean title in hand ready to go.

 

Why u getting rid of the taco?

 

i bought a 2019 off road (white one next to it)

 

Pmd

 

They didn’t want to take it on trade in?

 

Still for sale (plus added a tube notcher)...

JD Squared Model 3 tube/pipe bender with rolling cart/stand and 99% of the parts to convert it to electric over hydraulic!

None of it has ever been used, includes:

3 brand new 180 degree round tube dies still in original boxes...
1” with a 3.0 center line radius
1.5” with a 4.5 center line radius
1.75” with a 5.5 center line radius

Degree marker

Haldex Hydraulic Pump/motor mounted to bottom tray, $480 from Northern Tool.

Lion 3000 3” bore, 24” stroke, 3000psi hydraulic ram, $270 from Northern Tool.

Prince detent orbital valve with lever, $105 from Northern Tool.

Misc hydro hoses and fittings to plumb it.

$1,500 OBO

Located in Breckenridge. Must be picked up, and only selling as a complete package, not interested in shipping or splitting items.

Call or Text is fastest way to get ahold of me.
719-205-6427








I also have a brand new JD2 Beast tube notcher, never been used, sells for $500 plus shipping (its heavy!) on JD's website.

Details from their website:
The Beast is the ultimate tube notcher. It's able to easily handle straight notches, offset notches, angled notches, and notches in bends. The weight of the Beast Notcher is 50 lbs. This helps with the chatter and saves longer on the hole saws.
Features:

• Capacity of 3/4" to 3" OD
• Straight, Angle, and Offset Notching
• Offset notch up to half the tube diameter
• Angles up to 50° * 1" Ground & Polished Stainless Steel Shaft
• Double sealed needle bearings
• 2 clamps to allow you to notch on a bend
• Requires an ordinary 1/2" hand drill

GROUND AND POLISHED STAINLESS STEEL SHAFT & RIGID BEARING BLOCK - This is the most critical part of a hole saw style notcher. The Beast utilizes a ground & polished stainless steel shaft riding in a bearing block incorporating twin needle bearings and separate grease seals for maximum rigidity and reliability.

$400, also must be picked up.

Buy BOTH for $1,750

 

Tacoma Garage Sale. I sold my beloved 2nd gen Tacoma, and now I need to clean out my garage. If you are interested in something, pm me. Preference is given to full price offers that can pick up soon.

Single Piece Driveshaft $100 - This is a thin wall tube driveshaft. Do not get it if your truck is geared. My truck had 4:56 gears, and with 33's, the driveshaft would hit critical speed at about 80 and vibrate a lot. You could feel it begin at about 75. With stock gearing, it won't hit critical speed til 85-90mph. Also, this shaft works best with a 1-2 inch lift in the rear. I moved to All-Pro Expos, and angles were about 6 degrees at each end with this shaft after that. Those angles will wear out u-joints quickly. This shaft was freshly rebuilt, and then I found out it was thin wall shaft and would never work with my gearing on the highway. So it's in nice shape.

Double Cardan Driveshaft $100 - I had this built by Rocky Mountain Driveline. It doesn't have a lot of miles on it. It never felt perfect in the 40-60 range on my truck, but it was smooth above that, and had no shudder at takeoff. My driveline angles may have been too steep for it to work well, but my truck was at 3-4 inches of lift in the back (I went back to a two piece, which was smooth everywhere, but still had shudder at takeoff.)

SOLD to Chris OME 886's $20.

Bilstein springs. $20, brand new, never installed. These springs are what came with the Bilstein 6112's. I think they are rated at 610 lbs. I put Eibach 650lb springs in, because I had an ARB bumper and winch. They are in the Eibach boxes I got with my 650lb springs, but I don't know who made them.

Ram Laptop Mount $20. Dusty, but in good condition.

SOLD, thank you Chris. BAMF LCA skids $80.

(Sold to Nazupag) Gas tank skid, $20. I don't have the straps.

Front & Rear Driver's side windows $20 each. Front window has no tint, and rear has factory tint.

Left rear inner door panel. $20. Will accept offers, including beer, but only microbrews, and no belgians.

Left side front and rear chrome door handles. $10. In good but not perfect shape. Will accept a 6 pack.

Highly desirable 2011 grille insert, plus the grill surround. $40. The insert is in good, but not perfect condition. See the closeup. The surround is in good condition, except where the pressure washer removed some paint. (pound head on wall). The Toyota emblem is new.

Oil drain plug in good condition. Free to whomever buys something else. I had a Fumoto in the truck.

(I tried to put thumbnails in the post, but it keeps reverting to full size.)

 

Are these off of a 2nd gen? Interested in the gas tank skid. Single piece drive shaft?

 

Yes, off a second gen. I updated the post. I hit the wrong button before I was done writing. $20 for the gas tank skid.

 

Bump $700

 

still have this awning? Interested.

 

Yes.

 

PM Sent