1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tonneau cover seal question

Discussion in 'Tonneau Covers, Caps and Shells' started by Boogs, Sep 30, 2019.

  1. Sep 30, 2019 at 7:01 PM
    #1
    Boogs

    Boogs [OP] New Member

    Joined:
    Sep 2, 2019
    Member:
    #303986
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2009 Silver Tacoma TRD Off Road
    Hi,
    I just purchased a Gator SFX soft trifold tonneau cover for my 09 short bed Tacoma TRD (recently purchased used) and discovered that the sides of the bed are about an inch higher than the height of the tailgate and the height of the front of the box right behind the cab. Consequently, there is a gap in the front and a gap in the back where water could easily get in. Is this normal, and is there an easy way to correct the problem so that the gasket around the underside of the cover will make contact all the way around the bed? Apologize in advance if this is been answered previously. Thanks.
     

Products Discussed in

To Top