What Have You Done To Your 3rd Gen Today?

Not today but yesterday I was able to complete the AC drain mod and finally put my winter tires on rims, put my full size spare on my summer spare rim and got my stock take offs advertised online.

 

I'm curious too. Those are darker than mine and look good. Mine is all done inside tho. Lense is untouched.

 

I can still see some.
I cut about the same amount and my 35s still rub.
Edit- hang on a sec. I’m on my phone and the picture is small but did you do a CMC or relocate kit? It’s hard to tell with the fresh paint.

 

I really like my black chrome exhaust tip.


It finishes off what looked unfinished before.

 

Thanks!

Tire Size 285x75 R16

Wheel Size 16x8 -20 offset

 

Good idea, but I've got to say gas is going down in my parts. Paid $2.02 today.

 

I'm having the same issue. Did you find a fix for this problem yet @Cipher94 ?

 

Bed mat. My parts bins (milk crates) and golf clubs kept sliding around. Climbing in the back was killing my knees.

 

Changed out the rear differential fluid. The factory fill still looked pretty good. Very fine, like powder, metal stuck to the magnet in the drain plug but not even very much of that. Took about 3.5 quarts out of the gallon jug to refill the diff on my 2WD SR5. Not a bad job. Saved a little money and gained some peace of mind.

 

Where’d you pick up that gallon? I have only seen it in quarts around here.

 

My knees are bad too. This also helps especially if you have any kind of bed cover and was well worth the cost for me...
https://shop.agricover.com/product/cargoreachingtools

 

How did you tint your tail lights? I am thinking about doing this and running Meso LED kit in the back. It might be too bright without light tint.

 

I should have worded that differently. I do have arthritis in my knees, i have a bed step for getting in.

My issue is crawling in the back on my knees on the hard lumps. The mat is softer. I have a bunch of tools and parts etc in the back at all times so i keep the every day stuff near the gate. It's when i need my parts bins that i have to crawl in

 

Got it on Amazon here:

$91 Red Line 57905 75W90 Fully Synthetic GL-5 Gear Oil - Gallon

https://www.amazon.com/Red-Line-579...1570578284&sprefix=Redline+75w,aps,195&sr=8-1

 

How many miles are on your truck? Wondering at what point I should do this.

 

Not my truck but my last 3 vehicles I’ve applied VHT Nightshade over the tail lights. Got sick of getting rear ended, 3 for 3. Be careful, it does look good though.

 

Doing them this way does not change the light output. Everything is done inside and lense is kept stock. A lot of work but worth it to me.

 

Finally got my Meso stage 2 shifter on and working. Had to splice two harnesses but it's probably better than it was.

 

3rd pic looks sprayed on the outside . Do you have a better pic and how hard was it to open the tail light ? Btw I did led plate light . Im scared it’s gonna be super bright .

 

Did mine a few days ago.