Ecgs bearing tool

Does anybody have the measurements on the ecgs bearing removal tool. I'm going to be replacing my needle bearing and I have the capability of making tools. I need to know approx width of piece that goes in behind the needle bearing. Thanks michael

 

When I actually used this tool, I had to just slightly bevel the corner on the back side to get it to slip in.

https://www.tacomaworld.com/threads/ecgs-tool-cheat-code.530484/#post-16978997

 

Thank you very much that's exactly what I needed

 

In my opinion exact measurements won't be terribly helpful, I ended up having to shave the edges down on the tool that I used just to get it to fit in behind the bearing. Just order the new bushing from ECGS and get your measurements off of it. It's the same size as what you have to take out (obviously)

 

Glad to help. And in case you didn't know, you have to slip the plate in by itself, and then screw the threaded rod into it. A telescoping magnet helps to get it positioned properly.