Built relay/fuse blocks for sale

Hey everyone,

I wanted to let everyone know I’ll be selling universal fuse/relay boxes. They will come prewired and ready to go. These are similar to the busman relay fuse holders.


6 circuit fused and relayed universal box. The box comes with 4 legs which allows you to mount it basically anywhere you like. Seals will be used to protect circuits from water damage.
The kit will include...

•1x 12 position positive terminal block with cover [this will give you a good 12v source away from the battery for other additions like LED lights that come with a harness]
•1x 12 position negative terminal block with cover [this will be a solid ground point for any grounds you may need]
•3 ft of copper welding cable with soldered and crimped ends [red]
•3 ft of copper welding cable with soldered and crimped ends [black]
both power lead and ground will be loomed with black braided loom and heat shrinked.
•spade connectors on the output side of the relays for ease of installation of accessories
•individual colors of output wires for simple diagnoses and trouble shooting
•installation instructions with pictures and wiring diagrams (sent via email)

Here is a break down of the parts

•Terminals blocks-positive and negative with covers.
$30.00
•3 ft each Positive and negative power and ground leads{4 gauge} (soldered,crimped,loomed,heat shrink)
$40.00
•6x Relays + fuses
$20.00
•relay/fuse box fully built (connectors, leads, seals, relays, fuses, and labor)
$109.99

Full kit $199.99+ shipping
[I accept Venmo, PayPal, cash]
I would like to add that you are paying the same price I am for parts.

I will be able to make longer positive and negative leads for extra

below are pictures of the relay box I’ll be using, the terminal blocks, and and example of my power leads. If you have any questions feel free to comment or send me a message thanks guys.


Positive and negative bus bars (ignore connectors, I use a different kind that are much better looking and stronger)

Example of my power leads

relay/fuse holder that will used


example of wiring on bottom side (this is one is half way done).

example of a similar box I did

example of my wiring for different project.

 

.

 

Bump

 

Potentially interested. I'd like to DIY, but not sure I can swing it.

Would you be interested in cobbling together a DIY guide? I'd pay pal for a step-by-step custom guide!

 

I will help you anyway I can. I have a general electrical question thread in the technical support section. If you get started on it or have any questions I’ll be happy to answer them.