Drive shaft flange bolt torque?

Anyone know what the torque value is to check the drive shaft flange bolts? Thought I read 65 ft-lbs but can't find it now. Tks

 

I thick this is what you are looking for ?

https://www.tacomaworld.com/threads/3rd-gen-diy-maintenance-quick-reference.406712/

 

Thanks a bunch! One other question: do you ever have to replace the ADD oil? Small reservoir by front axle , says "use ADD oil only"

 

If you are talking about the front differential , there should be no need to add oil unless it is leaking somewhere . I am not aware of an external reservoir . If you have a pick I would like to see it .

 

Here is pic? Maybe it is referring to front diff? But you don't need ADD oil in diff

 

that , I believe is the electric motor cover for switching to 4wd and back ? The Automatic Disconnecting Differential (A.D.D.)I assume when it is lubed it need a special oil ?
Nice pic !

 

Agree, just don't see it in Maint guide. When do it ? No obvious drain and fill

 

The link above got maintenance says 65 ft-lbs for prop shaft bolts but calls the u-bolts. They are flange bolts. Guess typo. Assume 65 correct for front and rear?

 

Thanks a bunch!

 

I’m trying to do this this weekend. There is one nut, that’s not reusable, anybody knows the part number? It’s the one that you thought to 134 and then to 51.