Ontario BS Thread

Paint says 8 hours till i can handel it
And i still need to clear coat it...

Fuck it i can get away with a paste wax
So tomorrow maybe?

 

You can hear this Taco saying “Heeeeeeelp”




Good or nah?

 

GOOD BUD, REAL GOOD!

seems your new tube bumper came in then

 

Invisible tube bumper

I still have to build off that cradle eventually. But want to keep fog lights sections after all for my BrO lights.

 

Dude, that is so heartbreaking to hear. I am sorry for your loss and without words.
Putting up a memorial in Ardbeg would be a great idea. I would help anyway I could. I have access to rebar and form plywood to build something, if that's something you are interested in.

 

but it is that base mount that you had mentioned that you were getting for the tubes,
and tossing the Bruh lights back on or still selling?

 

It is the base that will have tubes eventually all around the front, whenever I find somebody who has a god damn tube bender...

I decided to keep bro lights, I want to retain those fog lights spots and build tube bumper with it in mind.

 

ah nice! Just remember that



also a few things i pointed out at ardbeg and forgot about till today;

@Norilsk tailgate gap cover which well... covers the gap between the tailgate and the bed. but i found 2 styles of them; the cheaper one or

Ecoological Gap Shield - Truck Bed Tailgate Gap Cover

the more expensive one from Amazoom. your pick of whichever you want, i don't know the difference other than 1 has tape on both sides where the other doesn't, the fancy expensive one seems to use 3M tape and lets you remove your tailgate since the cover is only on one side which i guess is ok?


@tgelata

$32 SmittyBilt R.A.D RAPID AIR DEFLATOR - SB2823

this is that air deflator in case you forgot and this is the other deflator kit i was telling you about

@3JOH22A You remember how i mentioned that the truck was pulling to the right if i let go of the wheel? I think it was just the tires or something since i tossed on my stock rims+stock rubber last week and the truck drives straight as an arrow any idea as to what it is? rim weights?

 

We are incorporating stock lights now....

 

Maybe an electrician @Joe23

 

Might just be a side effect of airing down and airing back up. Some tires can take a while to return to their normal shape.

 

This company can do it: http://www.condraulic.com/ Tomken & Britannia

 

My buddy has a 99 4runner that has seen better times. He told me to take what I want before he scraps it. Steel bumpers front and back.... wheels for my snow tires and roof rack is what I'm after. I doubt the bumpers will fit without some help from my plasma. The roof rack ..... idk. I have an access cab. Any thoughts? I dont mind drilling into my roof and putting in riv nuts.

 

If anyone could do it, a body guy is the best person for the job....

 

We do at work.

 

Looks good, but that isn't completely resistant to rust is it? My guns that are blued have gotten rust if I don't clean and oil.

***edit*** never mind, just saw the following posts

 

why does she look so wide now?

 

Took the camera for a ride today...couldn't beat the weather. The crowds tho, the crowds...ugh. Its like we took a drive into the city.

 

Not quite done yet, just throwing on a few coats of clear since the oil based Tremclad took a little longer than expected to dry, but it's got 2 coats on it now.

Won't be able to install it till 2 weekends from now





also i might need to bug someone who'd like to help fabricate a bracket to hold the cali-raised lower grille bar into place since the new bumper is removing the old mounting locations/ i was thinking of welding on a plate that it would sit in the same location, or use the stage 2 screw locations