Strut replacement

I have to replace the struts on my 2007 Tacoma (broke one). I would like to get the best ride as possible. I currently have a Pro Comp suspension lift. I'm unsure of exactly how much lift, due to the lift being installed prior to me purchasing the truck. There is a spacer on the front struts that is about 4 inches and 2.5"-3" blocks in the rear. Looking at the old strut I'm unable to determine what brand it is.

**Edit** I would like to get rid of the spacer if possible.

I have considered the Toyota 3" Lifted N3 Struts pre-loaded from Rough Country, there are certain things in the description that make me question if it will fit (i.e. - Only fits vehicle with 3 inches of lift).

I'm looking to get opinions on if the Rough Country would work, or other options that I may have. I have search the internet for answers and keep coming up empty.

Thanks in advance.

 

If it has a 4” spacer on the front coilover. You need a new coilover that has zero lift.( assume your planning on reusing the spacer) sounds like you have procomps 4” lift kit.

 

Post has been edited, I forgot to specify that I would ultimately like to get rid of the spacer.

 

Call procomp. They make an extended length strut specifically for their lift kit.

 

how much are you looking to spend? whats it used for? want to get rid of the rear blocks as well? did you want that same 4" lift or is something smaller ok/better for you?

 

I would like to keep it in the $300 dollar range.. The truck is used as a hunting truck, with only highway miles between home and the woods. No heavy off-roading. I would keep the rear blocks so the truck would be leveled.. I just want to be able to continue running my 33's with no issue.

 

id go with this then