Max tire and wheel size

I want to put 18s and what is the max tires size I can put on it
It has a 3in lift on it

 

285 60 18 that should be a 33

 

The sky is the limit... If you have a reciprocating saw

 

not really,,, 285 60 18 = 31.5"
I'm on 3" toytec lift w/ uca's
sporting LT265/70 18 falken wildpeaks. From the manufacturer they are 32.9" I don't rub, I didn't have to to trim anything, but they are the stock width 10.4" or 10.7" as their site says. Florida here so not wheeling for me, sand and crappy boat ramps/trails

 

Gotcha. Wasn't 100% sure.

 

You could go 285/65/18 depending on what wheel your running

 

I just spent a shitload of time doing this myself lol
all good

 

I went 17s because there are so many more tire options and sizes. OP also needs to remember to make sure the tire width is right for the wheel width.

 

yea, the offset of the wheel b/c of the extra width, that's a 32.6" x 11.2"
I have no experience with aftermarket wheels for this.
I am using the stock wheels that came on my limited btw

 

Yea, I thought about it, I might when these tires wear out, i'd rather have 17" I think, if nothing else it's cheaper

 

I’m running a 285/70/17 on 17x8.5 -10 wheel. Caster 4 degrees

 

I mean there is the cost of switching wheels but tires are a lot cheaper and your options are a lot greater for sizes, widths, and available tires.

 

Same here. KO2s.

 

I have 18" Vision Fury wheels with 275/65R18 KO2s.