What Have You Done To Your 3rd Gen Today?

Hopefully enough to clear 285s on some Ray 10s lol

 

Soft tri fold bed cover from Amazon. Paid $160 shipped prime. Good fit and seems like good quality.

Also purchased and installed some heavy duty universal mud flaps. Got the rears done. Will do the fronts this weekend

 

Gotcha, I have a set of 16x8 -10 waiting to out on my Tacoma. Still trying to decide on tire size.

 

Looks good, fellow Pismo Taco here!

 

Installed a couple of deer whistles, Bell P/N 01000-3:

$10 Bell Automotive-22-1-01000-8 Bell Deer Warning Unit, Black, PR

https://www.amazon.com/Bell-Automotive-22-1-01000-8-Black-Warning/dp/B000CC4O58

 

What year? I was class of '91.

 

If you lift your sway bar can come into contact with your front shocks. This mounts it lower and further forward so it clears.

 

Got my new Leer topper installed a couple weeks ago. Added a Prinsu rack, MaxTrax, and box. Oh, and a shovel too. Nothing came off on this wheeling trip. Must have put everything on right.

 

Woah the price tag on these! but much more versatile than the bed cleats! Thanx for sharing.

 

This one is aluminum but I think you can get it made of steel also.

MICTUNING Universal License Plate Mounting Bracket Front Bull Bar Bumper for Off Road LED Work Light Bar

https://www.amazon.com/MICTUNING-Un...luminum+Alloy+Bull+Bar&qid=1572402276&sr=8-42

 

NOAUKA Waterproof IP68 Night Vision 170 Degree Car Rear View/Reversing/Reverse Camera Universal Color CMOS Imaging Chip Backup Parking HD Front View Camera - Amazon

RFCC TTG2 Car Camera Control Switch System for Toyota Touch 2/Entune Front View Camera Adapter - Amazon - plug & play

Pretty simple install. The hardest part was figuring out where to put the camera and running the wire into the cab.
The camera control switch system operates the camera from the steering wheel controls. I can press [Mode] twice and it turns the cameras on manually. The rear camera still works as it should but can be turned on manually too.

 

Just installed bhlm w/ rx350 halo/drlswitchback and MESO side markers. These were retrofitted by Kevin @no vtec 4me he does some great work with these headlights.

 

That is excellent. Thanks for the write up!!

Where does the Camera Adapter plug into?

 

Thanks man! I really appreciate the feedback. It’s pretty damn close to OEM.

 

Sorry for being vague.
Everything plugs into the Entune radio. Unplug a few connectors, plug them into the controller, then plug in the wires coming out of the controller into the radio. Under the hood you ground one wire and find a 12v power source to power the camera. About an hour to do the install. If I had to do it again it would take about 30 minutes.

 

Here's the link to the magnets I got.
https://www.ebay.com/itm/10-50-100-...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

I used JBWeld to glue them in the back and vinyl tape to cover them so they don't damage the paint.

Hope this helps!

 

THANK YOU !! I just didn’t want to be the SmartAss as usual. Lol LMFAO

 

Which sliders are you running?

 

Fyi, I installed some foam pipe wrap to help protect the bars and provide a bit of filler between the bar and cover to prevent any flapping when at highway speeds.