Door seals

What type of grease y’all use to condition your door and trim seals?
Thanks.

 

Try silicone spray...works great without any overrun and mess!

 

Thats what I do before winter sets in. Helps to prevent the doors freezing shut

 

I should of added....don't use anything with lanoline or fluid film as it will cause the gasket to swell overtime...

 

I use 3M Rubber Saver, comes in a little bottle with a foam pad applicator. Been using for a couple of years now. Works well.

 

I bought some of this Honda grease years ago for a job on my wife's old Odyssey

I use it on all my seals once a year. It's good on wipers too, it helps prevent them from drying out.

$20 Genuine Honda 08798-9013 Silicone Grease

https://www.amazon.com/Genuine-Honda-08798-9013-Silicone-Grease/dp/B00GD49GTS

 

silicon paste lasts way longer than spray, not so fun to put on

 

Shin Etsu grease is a great stuff. You only need a little bit to bring rubber back to life. I still have the same tube I bought in 2001. I’ve used on Honda Odyssey with sliding doors, on Mazda Miata with slow power windows. I used on my Tacoma on all rubber parts; CV boots, ball joint boots and weather strips etc.

 

Added to my Amazon shopping list. Appreciate the recommendation!

 

I second this motion....best stuff out there! I have never used it on wipers......what is your process for that and not getting streaks?

 

i would just put a small bead of it on an old rag and wipe each side the blade. it doesn't take very much.