Lift for Tire/Wheel Combo

In need of some help/knowledge.

My parents came across a great deal for a near new set of Fuel Tritons with Nitto Terragrapplers off a newer 4Runner.

They’re 20x10 wheels and 275/60 (33x8.9) tires and I’m trying to make heads and tails on the amount of lift/ other modifications it would take to run this set up.

After some research it seems like a 3/2” lift should do it but am hoping a 2/1.5” with some trimming would accomplish it as well. This is a street queen and will almost never see dirt sadly.

Wheels have -18 offset and 4.79 back spacing.

The 2017 TRD Sport (in question) for your time,
Thank you!

 

Welcome! I use a 2” OME lift for 285/70’s not sure about 275/60’s?

 

Thank you! Looking at a size chart seems like yours are overall bigger. I know specifications with the wheels have a lot to do with what will or won’t work. Any trimming you had to do on top of the lift? And what’s the offset/ backspacing on your wheels?

 

Currently looking at a 2” Bilsteins with Eibach Coils for the rig.

https://www.bilsteinlifts.com/shop/...qR9sHIg5vSuj0ZCSrduPIQxgQ6hY9tyhoCB9wQAvD_BwE

 

I had the BP-51 kit installed so I’ll be able to adjust the ride height, plan to do that after Thanksgiving. Not sure about offset/backspacing but I’m running Ultra Maverick 235 wheels, 17x8‘s.

Haven’t had to trim but I am getting a little rub mid turn on my mudflap under compression. I hope the pre-load adjustment will alleviate the problem. Don’t know enough about the 275/60’s, but I believe they are about 1” shorter than the 70’s? I moved up from 265/70/17’s to the taller 285/70/17’s with the lift.