Bass Knob location

just wanted to share with you guys where I mounted the bass knob. Super easy to do.... Stop Drilling Into Panels!!!!! JK JK

 

i have mine in the same exact spot.

 

Nice. I was wondering where to mount mine tomorrow. I think I just found where....

Thanks.

 

Some advice , make you sure you Tessa tape the wire and box so you don’t have any rattling in there

 

Put mine in the useless cubby

 

I removed the cig lighter for mine.

 

Stealth enough next to the cup holder

 

Apologies for thread resurrection, but audio noob here! Have a general question about bass knobs. Are they specific to the sub you get? For instance do I have to use the one that comes with the powered sub I’m planning to try? It is a clunky bulky one and I was wondering if a smaller one such as this would work with a different product and be compatible.
For my 2008 non-JBL Double Cab TRD-Sport I’m considering the

$280 Rockford Fosgate P300-8P Punch 8" 300-Watt Amplified Subwoofer in Ported Enclosure - Slim Design for Tight Spaces - Black

Rockford Fosgate P300-8P
Punch Series compact 300-watt powered 8" subwoofer

 

Most of them are pretty specific and need to stick together. however, you can almost always take the big u got plastic housing off and then mount the little pcb board and knob in a blank switch, or wherever else you want

 

thanks destin
I’m tempted to just bring this setup to your shop when I buy everything lol. You’re in Tuscaloosa right ? Have u been there long? I had to have an xm antenna replaced once about 4 yrs ago and met a really cool guy there. Wasn’t sure if it was u.

 

Here's mine !!

 

I am in tuscaloosa, yes!

I've only been back in the car stereo shop for a little over 2 years now. I did home theater installs before this, and appliance installs before than. then a handful of years on the sales floor.

 

Please give use a how too

 

Where would you mount guys something like this ? It’s a Rockford fosgate powered sub bass knob and I’m getting it installed at a local shop. Not sure what to tell them but i sure don’t want this big thing sticking out ! And can u somehow take off the big casing and mount it in a knob or blank port location ? I want just the knob like showing

 

Rockford 360.3 working on getting a plate made


Bass for subs and eq settings

 

typically you can take the housing off. occasionally, the pcb board is quite large and you have to get a bit creative

 

Guys I located both of mine inside of the center console, on the inside wall of it running the wire through it and it's super out of the way. I also mounted it with velcro.

 

My vote has always been to relocate to the button blanks. Less invasive and always looks the best.

 

I have one of those key fob garage openers but was never able to get it to work. Could you PM me what you did?

 

That was actually just the fob for my home alarm system