1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Leaf Spring Install Tip - Aligning axle and bolt hole

Discussion in 'Suspension' started by LaHunter, Nov 27, 2019.

  1. Nov 27, 2019 at 4:45 PM
    #1
    LaHunter

    LaHunter [OP] Active Member

    Joined:
    Oct 4, 2019
    Member:
    #307039
    Messages:
    29
    Gender:
    Male
    Hey All

    Just thought I would share a little tip...

    I installed Icon RXT leaf spring on my 3rd gen yesterday. The passenger side was no problem, other that hitting the leaf spring with a dead blow hammer to seat the bolt in the hole on the axle a couple of times.

    However, the driver side would not line up. So finally I put a strap on it and racheted in no problem. Strapping the axle to the frame and racheting made it super easy. Maybe you all already knew to do this, but this was my first time install and thought I would pass it along.
     
    Tucker-Taco, levie125 and hrivera007 like this.

Products Discussed in

To Top