Used, Far From Perfect NST Billet Crank Pulley 1GR-FE

I found this used NST Billet Crank Pulley on Ebay and installed it this past spring. A few thousand miles later I had an oil leak. Sure enough the billet and the steel from the crank seal don't play well together. I was sent this info by a member here(https://www.tacomaworld.com/threads/fs-used-nst-crank-pulley.452755/#post-15230436), ordered the SKF sleeve and despite successfully pressing dozens of wheels bearings on various applications throughout the years, seemed to have messed this one up somehow. I'm over it and went back to stock. If you'd like to have a go at it, snap it up here.

$80 PayPal F/F shipped to you in the continental USA.





I must not have removed enough of the billet flashing from the grove when I pressed on the SKF sleeve. Notice bow on the right



Ribs damaged by PO but smoothed out with an emery board

 

How bout $60 shipped? Bump