Heater/HVAC Fan Not Working at Any Speed

So this past Sunday I put in a new flasher relay for LEDs.
I also had the climate control off to put in a new bulb.
I just noticed that when I turn on the fan nothing starts/blows at any speed (even high)
I can hear the re circulation engage when I press the button (light comes on).
The A/C light does not come on when pressed.
I have checked the Ignition 2 fuse in the dash.
Under the hood I have checkedthe A/C fuse,heater fuse,and heater relay(swapped with headlight relay).
All check out fine.
I'm assuming i must have pulled something loose when I was in there switching out the flasher relay but I dont know what to look for and there is a shit ton going on in that area.
Any ideas of what to look for would be much appreciated!

 

This schematic may help ypou locate the problem:

http://www.customtacos.com/tech.old...toyewd/06toypdf/ewd/2006/tacoma/h/em01d46.pdf

The heater fuse is tied to the IG1 NO2 10 ampere fuse. I would also check the IG1 10 ampere Fuse.

 

Bump

 

You took things apart and now the blower doesn’t work. There is no way we can speculate on what you put back together incorrectly.

 

Actually there is plenty to speculate.
I may be speculating but I bet if I searched your post history I could find plenty more unhelpful posts.
But that's my speculation.

 

Don't bet more than you can afford to lose.

 

Well I just don't know what to say after that response.

Did you look at the print I linked?

 

That was a nice resource you put out there for him, I hope he can leverage it to his advantage . I would like to fond out the outcome of this.