1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: CarPlay/Android Auto module - $270 solution for pre-2020 trucks Help me pick out sound deadening materials on Amazon Easy way to fish USB and microphone on Gen2 doublecab? 3rd Gen JBL upgrade - round 2 2014 Tacoma Access cab 4 ch amp + Homegrown Stealthbox install Amplifier Wire Gauge Question

Tweeter non plug and play

Discussion in 'Audio & Video' started by Notsogood, Dec 3, 2019.

  1. Dec 3, 2019 at 7:37 AM
    #1
    Notsogood

    #1
    Notsogood [OP] Member

    Joined:
    Dec 3, 2019
    Member:
    #312353
    Messages:
    6
    Vehicle:
    2016 blazing blue
    Has anyone installed any non plug and play tweeters in there 3rd gen? Any advice on this would be appreciated
     
    Notsogood, Dec 3, 2019
    #1
  2. Dec 3, 2019 at 5:47 PM
    #2
    Hooper89

    #2
    Hooper89 Well-Known Member

    Joined:
    Sep 13, 2019
    Member:
    #305186
    Messages:
    1,577
    Gender:
    Male
    Vehicle:
    2016 White TRD Sport
    There was a guy with the JBL system who installed 3.5 JBL speakers in the dash. Is that what you are thinking about?
     
    Hooper89, Dec 3, 2019
    #2
  3. Dec 3, 2019 at 6:06 PM
    #3
    Notsogood

    #3
    Notsogood [OP] Member

    Joined:
    Dec 3, 2019
    Member:
    #312353
    Messages:
    6
    Vehicle:
    2016 blazing blue
    I’m just talking about putting new tweeters in the dash but not the plug and play kicker ones the probably I am having is that the tweeters are wired in parallel with the door speakers and the factory harness has 4 wires so if I install new tweeters I’m not sure what wires to and splice into where
     
    Notsogood, Dec 3, 2019
    #3
  4. Dec 5, 2019 at 8:33 PM
    #4
    shane100700

    #4
    shane100700 Bed, Bath & Beyond Crawler

    Joined:
    Jun 1, 2011
    Member:
    #57578
    Messages:
    7,012
    Gender:
    Male
    Montana
    Vehicle:
    2019 DCSB, OR
    Rocket Boosters
    If you go with passive crossovers built into your tweeters, you won’t have to worry about any rewiring. Otherwise you will have to spit the adapters, or go with Taco Tunes 4 wire version. TTunes isn’t held in the highest regard here though.
    $14 RED WOLF Car Front Dash Tweeter Speaker Wiring Harness for 2008-2022 Toyota RAV4 Camry 4Runner Highlander Scion, 2010-2019 Subaru Forester Factory Speaker Replacement Adapter Connector Non JBL System

    https://www.amazon.com/gp/aw/d/B07RMZ4CR6/ref=ox_sc_act_image_5?smid=A1LAPRHCR7XHF0&psc=1
    $18 Speaker Adapters for Tweeters Fits Lexus, Fits Subaru, and - 1.25" Cutout - SAK009_125-1 Pair
    https://www.amazon.com/gp/aw/d/B01BLMBHPW/ref=ox_sc_act_image_3?smid=A1T3AW1B06XC6M&psc=1
     
    shane100700, Dec 5, 2019
    #4
  5. Dec 6, 2019 at 10:10 AM
    #5
    Hooper89

    #5
    Hooper89 Well-Known Member

    Joined:
    Sep 13, 2019
    Member:
    #305186
    Messages:
    1,577
    Gender:
    Male
    Vehicle:
    2016 White TRD Sport
    I would stick with kicker ones until you get an amp and then rewire everything.
     
    Hooper89, Dec 6, 2019
    #5
To Top