1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CLOSED. Kelford Cams for 1GR GB.

Discussion in 'Performance and Tuning' started by BillDaCat8, Jun 27, 2019.

  1. Nov 12, 2019 at 6:40 PM
    #1181
    DocME

    DocME Well-Known Member

    Joined:
    Aug 24, 2018
    Member:
    #263956
    Messages:
    1,583
    Gender:
    Male
    California
    Vehicle:
    '07 FJ Cruiser
    TRD S/C, UCON, 61# inj, 2.5 pulley, 7th inj, Roostfactor Y Pipe, URD exhaust, WAT Nomad Valve body, Dana 60, DK LT, JD FAB LCA mounts, custom roof rack...and way too many others.
    Gears can be done any time. Cams should be done while you’re already in the motor.
     
  2. Nov 12, 2019 at 6:40 PM
    #1182
    mightytacoman

    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,406
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Both can be added at a later date when your money isn't as tight. The cams are a more tedious install though
     
  3. Nov 12, 2019 at 6:55 PM
    #1183
    GT7

    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    Get em
     
  4. Nov 12, 2019 at 7:29 PM
    #1184
    White lightning boosted

    White lightning boosted Well-Known Member

    Joined:
    Dec 30, 2017
    Member:
    #239848
    Messages:
    8,147
    Gender:
    Male
    First Name:
    Jesse
    Poulsbo
    Vehicle:
    15' DCSB OR S/C
    Lift, pedal commander, led foglights, led interior lights, led back ups, led under lighting, urd tcai, led headlights, methanol injection, 76mm tb, hood struts, dif breather mod, ratiotek trans kit, x-series gauges, true cool trans cooler, belt wrap mod, 2.8 pulley
    your in the motor. cam the motor. lift, gears, etc can always happen in time. cams=30-40 hp. do it.
     
    Torspd and 5thGearPinned like this.
  5. Nov 13, 2019 at 6:06 AM
    #1185
    mightytacoman

    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,406
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Speaking of being in the motor, I'm wondering about doing head work and what could be gained there. My builder says with forced induction setups a 1:1 for intake to exhaust valve sizing is preferred. For naturally aspirated exhaust is usually 80% of the intake in size. Our intake valves measure 36.5mm, exhaust 29.5mm. Finding 1mm over is easy. And I might have found 2mm over for exhaust valves but I need to do more research. Anyone want to throw a wild number out there as to how much would/might be gained by going 2mm over in the exhaust and or intake?
     
  6. Nov 13, 2019 at 7:39 AM
    #1186
    o0opackersfano0o

    o0opackersfano0o Well-Known Member

    Joined:
    Oct 18, 2016
    Member:
    #200102
    Messages:
    2,046
    Gender:
    Male
    First Name:
    Tony
    North Berwick, ME
    Vehicle:
    2005 xrunner swb
    Magnuson supercharger, 2.6 quick change pulley, 76mm throttle body, Doug thorley long tubes, urd y pipe, wot box with 2 step, 170 thermostat, airaid intake, urd short throw, djm 3/4
    what do the valve springs look like that the cams come with? come with retainers too?
     
  7. Nov 13, 2019 at 12:07 PM
    #1187
    mightytacoman

    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,406
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Springs are slightly shorter, come with a fancy washer like piece to get the length correct. No they don't come with retainers
     
  8. Nov 19, 2019 at 6:12 PM
    #1188
    GT7

    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    @athalos
    update?
     
  9. Nov 19, 2019 at 6:13 PM
    #1189
    GT7

    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    I just got 1 mm over cuz why not. Itll be fine either way I figure
     
  10. Nov 19, 2019 at 6:14 PM
    #1190
    White lightning boosted

    White lightning boosted Well-Known Member

    Joined:
    Dec 30, 2017
    Member:
    #239848
    Messages:
    8,147
    Gender:
    Male
    First Name:
    Jesse
    Poulsbo
    Vehicle:
    15' DCSB OR S/C
    Lift, pedal commander, led foglights, led interior lights, led back ups, led under lighting, urd tcai, led headlights, methanol injection, 76mm tb, hood struts, dif breather mod, ratiotek trans kit, x-series gauges, true cool trans cooler, belt wrap mod, 2.8 pulley
    update is he may do a US visit soon! told him to stop in the pnw 1st.
     
    Athlaos likes this.
  11. Nov 20, 2019 at 4:39 AM
    #1191
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,666
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    What he said! Is that s/c belt on yet?!
     
    BillDaCat8[OP] and Athlaos like this.
  12. Nov 20, 2019 at 1:08 PM
    #1192
    Athlaos

    Athlaos Destruction Mode

    Joined:
    Nov 24, 2010
    Member:
    #46672
    Messages:
    2,568
    Gender:
    Male
    First Name:
    Leigh
    Edmonton
    Vehicle:
    2011 SR5 Manual TRD SC 1.87" pulley
    A flux retro-capacitance encabulator
    Belt still not on. Haven't been motivated to install it - roads have been so icy that it doesn't matter. Procrastination maybe but I'm justifying it by saying I'm doing tuning for minus 10 to zero manifold vacuum conditions.

     
    TRON and GT7[QUOTED] like this.
  13. Nov 20, 2019 at 1:29 PM
    #1193
    Athlaos

    Athlaos Destruction Mode

    Joined:
    Nov 24, 2010
    Member:
    #46672
    Messages:
    2,568
    Gender:
    Male
    First Name:
    Leigh
    Edmonton
    Vehicle:
    2011 SR5 Manual TRD SC 1.87" pulley
    A flux retro-capacitance encabulator
    Yes, I am planning a trip down there! Might end up being in two parts, though - one in the spring and one in the fall. Depends how my work schedule settles.
     
  14. Nov 20, 2019 at 3:56 PM
    #1194
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,666
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Makes sense. At least all is running well.
     
    Athlaos[QUOTED] likes this.
  15. Dec 8, 2019 at 3:59 PM
    #1195
    o0opackersfano0o

    o0opackersfano0o Well-Known Member

    Joined:
    Oct 18, 2016
    Member:
    #200102
    Messages:
    2,046
    Gender:
    Male
    First Name:
    Tony
    North Berwick, ME
    Vehicle:
    2005 xrunner swb
    Magnuson supercharger, 2.6 quick change pulley, 76mm throttle body, Doug thorley long tubes, urd y pipe, wot box with 2 step, 170 thermostat, airaid intake, urd short throw, djm 3/4
    Ok. Still waiting for review on the cams?
     
    TRON likes this.
  16. Dec 13, 2019 at 12:02 PM
    #1196
    Athlaos

    Athlaos Destruction Mode

    Joined:
    Nov 24, 2010
    Member:
    #46672
    Messages:
    2,568
    Gender:
    Male
    First Name:
    Leigh
    Edmonton
    Vehicle:
    2011 SR5 Manual TRD SC 1.87" pulley
    A flux retro-capacitance encabulator
    I did my first oil change. No metal flakes came out and there wasn't any metal filings on the drain plug magnet. I guess I did the install correctly.
     
  17. Dec 13, 2019 at 2:58 PM
    #1197
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,666
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    That's a damn relieving sign.
     
    Athlaos likes this.
  18. Jan 4, 2020 at 6:28 PM
    #1198
    henryp

    henryp Well-Known Member

    Joined:
    Jan 6, 2012
    Member:
    #70080
    Messages:
    2,289
    Gender:
    Male
    First Name:
    Henry
    Montana
    Vehicle:
    09 DC TRD Off-Road 4x4
    Form follows function
    gonna pull the trigger on the cams. emailing Kiel tonight. unless anyone have regrets and wants to sell theirs? I'll cover shipping.
     
    Torspd, JustDSM and Athlaos like this.
  19. Jan 5, 2020 at 5:22 AM
    #1199
    o0opackersfano0o

    o0opackersfano0o Well-Known Member

    Joined:
    Oct 18, 2016
    Member:
    #200102
    Messages:
    2,046
    Gender:
    Male
    First Name:
    Tony
    North Berwick, ME
    Vehicle:
    2005 xrunner swb
    Magnuson supercharger, 2.6 quick change pulley, 76mm throttle body, Doug thorley long tubes, urd y pipe, wot box with 2 step, 170 thermostat, airaid intake, urd short throw, djm 3/4
    Emailed him the other day. Won’t be back till Monday.
     
    henryp[QUOTED] likes this.
  20. Jan 5, 2020 at 8:41 AM
    #1200
    BillDaCat8

    BillDaCat8 [OP] Well-Known Member

    Joined:
    Jun 25, 2017
    Member:
    #222348
    Messages:
    1,869
    Gender:
    Male
    First Name:
    Jake
    PHX
    Vehicle:
    07 4x4 Access Cab M/T
    My shit is all stock.
    I haven’t seen much action in here lately.
     

Products Discussed in

To Top