TRD Pro Rear Shock (Upper) Bushings and Washers?

Hello TW

Replacing rear 5100's in a 3rd gen with TRD Pro shocks. However, the threaded shaft diameter is larger than that of the 5100's. The TRD Pro shocks did not include washer/bushings to install to the upper mount, and the ones from the 5100's dont fit over the shaft.

Is there a special kit associated with the TRD pro suspension? Looked around but couldn't find a Toyota P/N for such.

Thanks!

 

All mounting part (bolts/nut/washers) for the TRD pro struts are the same with the exception of the rubber bushings (at least according to the parts guys at my local dealer)

 

Maybe just drill out the 5100 bushings, they should be the same outer diameter since they use the same upper mount.

 

Talk to FOX?

 

Here are the specs from fox on the replacement bushings they are sending me
Bushing: Eyelet [0.380 ID X 1.268 OD, 0.639 TLG] Polyurethane, Black, Mount Stud