Prinsu Rack with Toyota DAT issue solved!

Hello Tacoma family. I just finished installing my Prinsu rack in my 2019 TRD Pro with DAT.

I just want to share some tips on how to install it without replacing your factory intake. I will post some pictures below.

You will need to drill 2 holes in the right side of your Prinsu rack to accommodate 2 after market screws (Home Depot).

The DAT will be secured using the rack. You will have to remove the factory bracket and toss it, you will not need it.

One last thing, you will need to make a small indentation on the removable portion of your DAT because it will hit the Prinsu rack, I used a heat gun to mold it to give room to the rack.

I hope this thread will help someone. Have a nice Taco day!