Extra .5" rear

Recently put on new wheels and tires and had a lift put in also.
Went with Extreme Terrain 2.5" front 1" rear.
The shop that installed said they tried to level as best as possible but the front is now .5" higher than rear.
So my question....are they able to remove a half inch from front or is it one 2.5" block? Or can I add .5" to the rear and if so what is best way to achieve this? Shocks or add a .5" block?
Thanks

 

OK Boomer. I would get (make) some shim(s) and install under the rear leaf springs.

 

AAL.

 

I just completed a AAL but now need an additional .5" rear to level it properly. not looking to remove what I just did.

 

I'm confused, do you have an aal or a block, or both?

 

Ome makes a 5mm spacer but by the looks of your pic a little more than 1/2" is necessary to level

 

Extreme terrain only offers lift blocks.
So like stated above, remove the stupid block and install a rear Add A Leaf kit and it will net you 1.5-2. With your cap, I’d leave the overload leaf in and you’ll sit fine.

 

I had this installed when the wheels were put on.....
Supreme Suspensions 2.5 in. Front / 1 in. Rear Pro Billet Lift Kit (05-20 4WD Tacoma)

 

You installed a block.

Replace it with an AAL, come in 1.5 and 2 inches.

 

Got it thanks

 

how do you guys feel about this option? guess I should have done some more homework before the first attempt.....
Supreme Suspensions 2 in. Rear Add-A-Leaf Springs (05-15 6-Lug Tacoma)

 

If the shop had taken measurements prior to install they would have known what to install. I assume the cap was on when you took it.

 

Wheelers has a 1/2" rear block. Ran that on my 2nd gen with no problems.

 

That would probably be a lot less work adding the .5" block rather than removing what I just did and pulling rear leaf apart....Thanks

 

I bought the lift kit myself and brought it to my local guy who installed it. Yes cap was on...

 

Makes sense. Aal can be hit or miss one truck will get 2” the next 1.5”. Throw a 1/2” block under there and be done with you’ll be fine. Just confirm your ubolts are long enough.

 

Thanks for the input

 

You already have a lift block in the rear, you cant stack another block on top of it. Your going to have to go with the add a leaf or replace the current lift lift block with a thicker one.

 

I try not to install blocks on tired old springs, they are likely flat or inverted.

An add a leaf will go a long way.

 

Thanks guys, thats why this site is a great source for help.....