Any electrical Guru's in the house ?

Went shopping for an intermittent wiper stalk for my 2019 SR. Found this on eBay. It's advertised and marked as coming from a 2019 Taco and the wiper stalk PN is correct. The left hand headlight stalk is different from mine. It has a dial ring and mine doesn't. Apparently this is for the fog lights. My question is, what, in addition to a set of fog lights do I need to make use of this headlight stalk? a harness maybe?

TIA

 

I’m not an expert- but I’ve read that if you have a vehicle without fog lamps likely the wires were run anyway. Worth checking. The SR5 crew would be able to chime in on this too.

 

Thanks.

 

Worth a look. The wires may be on both ends TBH. Not an answer but maybe useful for ya!

 

That would be nice. I plan to add fog lights anyway. I know some have wired the to a switch in the dash but the stalk would be more convenient.

 

I have a set of OEM fogs for sale if interested. Pulled them off at 100 miles off my 2018.

 

@caribe makaira might be able to assist

 

I believe if the wiring is there you will need the lights/housings, the stalk (which you have) and a relay. Should be plug and play from that point on. Wait for caribe makaira to be sure!

 

Nitori's OEM SR Foglight mod!

 

even if the wiring is there he will need the harness that connects to the fogs. so everything you listed + the harness

 

Relay
https://www.amazon.com/gp/product/B07DMJ9DNC/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Harness
https://www.toyotapartsdeal.com/oem/toyota~wire~engine~room~n~82114-04010.html

Lights, and stalk.

 

Thank you sir.

 

figured it might save you some time searching like i did.

 

If you don't have the terminals in connector C11 -
https://www.ebay.com/p/658141887?iid=202508563332

You'll need 2 (+) & (-) [9&8]

 

I did the oem fog mod with switching the stalk using Nitori’s guide. In order to install the light stall you need to disconnect the airbag and take the steering wheel off. It’s not particularly difficult, just go slow and triple read the important posts of that thread.

 

Awesome information here and impressive response time...

 

OCD wire add:

 

What's the purpose of this ?

 

The blue wire your SR might not have. It's route from the Main Body ECU (M6) to the Headlight select stalk (C11). But you can use a shorter route...

 

good chance you have a blue wire. I have a base SR with convenience package and it included the Blue