1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Timming chain confusion.

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Derrick719, Dec 28, 2019.

  1. Dec 28, 2019 at 2:16 PM
    #1
    Derrick719

    Derrick719 [OP] New Member

    Joined:
    Dec 28, 2019
    Member:
    #314424
    Messages:
    1
    Gender:
    Male
    First Name:
    Derrick
    Vehicle:
    2005 tacoma
    Stock as stock can be
    Ok so I just did my timming on my 05 tacoma 4.0.
    Before you read. My valves are not bent as I've done a leak down test.

    I have everything fine on bank 2 (drivers) it actually runs on the 3 cyls. But bank one (passenger) no compression. I have the cam gears set correctly the exhaust dimple lined up with the nub and the intake I have the single arrow lines up with the notch.

    I think I'm using the wrong arrows. But my manual says different
     
    Athlaos likes this.

Products Discussed in

To Top