Does anyone have these headlights?

I like the lights. Ive hooked up the led DRL tube so its on with my DRL's and they look super cool. Just hate PTL, and the rap HID's they use.

 

That first pic is so mean

 

Also did you get your headlights from Tacoma beast or Amazon?

 

I want to run some brighter lights out of these projectors dont want to the hassle of HIDs and ballasts going out. I've just runnin halogen but ive seen a couple people are running LEDs with luck. Can anybody here help?

 

Tacomabeast. Don’t buy them. Just had a diode crack and a wire burn because it got too hot. Not worth the risk.

LEDs won’t work. They are halogen specific projectors so LEDs will either be less bright or have horrible spotting

 

It’s the same headlight, all or most are made by Spyder. The light output is shit if you don’t care

 

Okay thanks, I figured I’d just get the h11 50w by beamtech along with it.

 

Is there any type of specific sealant that you used or just basic silicone?

 

Clear rtv silicone, just like I had said.

 

Might of missed it in all that reading but what kind of bulbs work best with these? I’ve been on the fence but don’t want to sacrifice my light output.

 

I just ordered the

$26 beamtech h11 led fog light bulb, CSP chips 6500K 800 lumens xenon white extremely super bright of 2

beamtech h11 led headlight bulbs, I’ll let you know how they are when I put them in.

 

Wow, just read every post in this thread and my head hurts.....

Forgive me if I missed it but, has anyone put these in?

https://www.protuninglab.com/2lhp-tac12jm-tm.html

I like the look of the drl tube on this model that more closely resembles the third gen drl’s.

currently I am running the blasphemous led bulbs in the stock headlights. Before I receive an earful from everyone. I have tested the oncoming light and it is by no means blinding to oncoming traffic. I had my buddy drive my truck down my street and I was in two different vehicles, car, then suv, to make sure I wasn’t being an asshole and blinding people.
In regards to this headlight that I linked above, is the best option a halogen replacement bulb, LED bulb, or HID?

 

I dont have those exact head lights but in my full opinion I would say go with the Leds. Everyone is switching over to them and they are definitely the brightest

 

is this just simply a different design?

 

Yeah

 

I think I may pull the trigger on this one

 

These are pretty sweet. I like how the led bar goes all the way across. Makes it look a lot like the 3rd gen lights.

 

thats my thought as well.

 

I would just also get a thing of clear silicone and when you get the lights go around where the housing and the lens connect on the lights, because there’s been reports of condensation on the inside. I siliconed mine and they’ve been perfect(knock on wood) haha