Baja Design Lights and Factory Fog Wiring

Having issues with the squadrons I just installed. Cut the factory connector and added BD’s connector. Factory wires are green and black, BD is white and black. So, I did green to black and white to white. They are not working. Also, this is my first time installing these type of connectors. They seem straight forward but maybe I’m doing the connectors wrong? Here’s a few pics to help. @Baja Designs

 

Check the polarity and reverse the wires. Check the fuses too.

 

Wow...are you doing this work on the showroom floor? I’ve never seen a truck that clean! Even new!

 

Don’t want to sound stupid, but how do I check polarity? I have a multi meter. Thanks

 

probably just the new paint on the new bumper. Just got it installed. The rest of the truck is dirty. I promise.

 

Just reverse the wires and see if they fire up.

 

fuse is definitely blown. I’ll flip them (green hot) and replace the fuse. And cross my fingers. Thanks.

 

on the toyota, the white with black stripe is ground, on the BD light the black is ground

 

Success! Thanks TW!