UTAH (and Surrounding Areas) BS Thread

I bought my truck specifically for the rear locker...and have never used it. If I knew then what I know now, I would have bought a sport for the better day to day driveability of the LSD.

 

I had my TSB updated at Mark Miller Toyota. It was free of charge.

 

As long as you are still under warranty they are free. Problem is if you aren’t showing the signs of the tsb, most dealers won’t do them.

 

Mark miller wouldn’t do it for me

 

Then I would suggest move on to the next dealer or pay someone that works at the dealer to make it happen.

 

Just find it odd that MM will do it for some people but not others.

I’ve got a techstream setup. I’ll do it myself eventually (hopefully once I get confident with the computer/cable).

 

I think in my opinion these dealerships don't want to do the work if they can't get any money from vehicle owners.

 

I never had MM turn down TSB work for me. They have done my rear suspension twice and both front headlights on my 2nd gen without any fuss.

 

Embrace the sense of Schadenfreude Sometimes lessons need to be learned the hard way.

 

Yeah they've helped me out with other warranty/tsb items on both my tacomas. Just wouldn't do the software update. Weird...

 

Don't get me started on that joke of a page. Bunch of posers.

 

Bro I laughed so hard I snorted lol

 

LOL, I remember when it all went down, I came in with some pokes and prods, you came in with a flame thrower

: me

You:

 

Haha yup good times, the breaking point for me was the whole Tacomabeast incident, that got me kicked out I like to call them the windshield banner group.

 

LOL, so many windshield banners.



Reminds me of the TTC

 

Karl Malone did mine when I asked. I went in with the TSB printed out and read the description of the TSB to them for what my symptoms were. I am running OVTune now on 04b04 or whatever the latest one is.

 

So I got my tailgate repainted. I had a strip of clear vinyl protection on the top couple inches of the tailgate to protect the seal/flap on my shell from rubbing the paint. I need to get another strip of clear put on. Does anyone know a clear bra/tint shop that would do a scrap strip for cheap? @BHill_teq, anyone in your dept. still do this?

 

Do it yourself maybe? Pretty easy to apply with some soapy water mix and a squeegee.

$17 3M Clear Paint Surface Protection Vinyl Wrap 2" Wide Tape Roll (2" x 84")

https://www.amazon.com/VViViD-Clear...78067911&sprefix=3m+pain,aps,242&sr=8-15&th=1

 

Was going to suggest the same thing. That 3M stuff is pretty easy to apply yourself, does better than the clear bra stuff, and is certainly going to be cheaper. I put it on my wife’s ‘19 JLUR on the back tailgate because from the factory it rubs and squeaks. That tape fixes the problem. This is the stuff I used:

$46 3M 5430 PTFE/UHMW Tape, 0.5" width x 5yd length (1 roll)

https://www.amazon.com/dp/B007Y7ESCI/ref=cm_sw_r_cp_api_i_8N2dEb9C3G39X

 

We use it as paint protection on our mountain bikes, its crazy durable and done properly almost undetectable.