Led switch won’t turn off

So update nothing yet to work light stays on as soon as the red wire next to the touches the red wire of the lights

 

I’m gonna need you to write this again but a bit more clear

 

Okey now I figured out the led switch has 2 leds that illuminate the switch It is wired to a point where both switch lights are off when the car is off , when I click the switch only one of the switch lights turns on and when I turn on my head lights the other switch light comes on i assume this is so to indicate when the leds are on during the night but the issue that follows is that the lights are on different modes now

 

The issue going on now is that the pods are in different modes when I turn them on

 

That sounds like it’s working properly. One light that turns on and off to indicate when your aftermarket lights are on. Another light that turns on with your headlights so you can find the button at night.

Which lights do you have? If you turn the lights off and back on does the mode change?

 

Yes it has 6 modes and they change every time they turn off they will turn on but in the next mode

 

So it sounds like the light is functioning properly as well

 

The problem is that the lights are on different modes not in the same one so one flashes while the other one is normal and so on

 

Ahh interesting. Sounds like they just got outta sync. Do you have a link to the lights?

 

Wdym by a link ? The only thing I can think of is disconnecting where the light connects with the wire harness and switch one of them on and off while the other one stays the same

 

That’s a good idea. I meant where did you buy them. A webpage link to their product page. I was going to read their instructions. Try your idea first though.

 

https://www.amazon.com/dp/B07XH1QWJ6/ref=cm_sw_r_sms_c_api_i_ZSucEbW2Z0JDC