Who’s had luck mounting traction boards under the OEM Tonneau?

Pretty much what the thread title says, has anyone had any luck mounting traction boards in the bed under the stock tonneau cover, and if so which brackets did you use? I’m often doing solo exploring, and while I don’t do anything crazy I wouldn’t mind the extra peace of mind. I’d rather not mount them on the exterior for both aerodynamic reasons and the fact that they’d be easy for someone to nab, even with them locked down. Thanks!

 

I’m considering this mounting option, except my tonneau is a BAKflip. The boards would have to mount on the third panel, which is the one closest to the cab. My only concern is clearance towards the floor

 

For reference, I found this:

 

I have 4 Tred boards mounted under mine. I bent a couple strips of aluminum and bolted the Tred mount pegs to it. I do have the oem header rail which it is attached to.

ARB Quick Release Extended Retaining Pin Pk 2 (Req 2 Sets) (T2QP162)

https://www.amazon.com/dp/B08ZSZRR18?ref=ppx_pop_mob_ap_share

 

look here - https://www.tacomaworld.com/threads/maxtrax-and-actiontrac-bed-mount-for-3rd-gen-tacomas.649875/

 

These work for me.

 

You beat me to it! That's my red taco showing the 4 boards mounted.