What Have You Done To Your 3rd Gen Today?

I believe he is talking about the A pillar. The wires go into the white plug in the picture. The blue wire is the positive. It's where I tapped in for my puddle lights.

 

Gotcha. Thanks

 

Just add little bacon grease and char on the grill. Still won't help cali..... I don't think....

Sorry. Lol.

 

They are behind the drivers side kick panel. Search for instructions for installing factory bed lights for 2016-2019. It with show you which ones to tie in to. Edit. Here it is

 

I had the same issue when I wired my light bar. The switch stayed illuminated all the time. If I recall I switched the green wire and the red 1 wire and that resolved it. I then tapped into the fuse box to my tail lights with the red 2 wire so that the switch would illuminate when the dash lights are on like all of the other switches. Post 263 and 264 should help.

https://www.tacomaworld.com/threads/ken-the-electrical-guy-q-n-a.632969/page-14#post-22298402

 

Merica!

Where would a fellow Patriot find such a bad ass decal?

 

I used steel stock. Got it at a local hardware store.

 

https://youtu.be/DgRVNjsuycQ

 

Thanks @Rodchester for your help. Those instructions explained a lot.

 

Thanks I knew about the A post but wanted to find out where the other location was. I am putting in footwell and frame mounted puddle lights and heard about the alternative
location. Thanks for confirming that the blue wire = +.

 

https://etsy.me/2Z6i1j6

 

Over the last 2 weeks I did the Rough Country 3in leveling lift and added new rims and tires MOD. Toyo Open Country 285/70R17 on 17"7XD128 Machete Satin Black Rims.

 

Back to stock tires! Crazy how much less stress the motor/tranny is under. Mpg back up to 18-20mpg. 315s ordered soon, now that 5.29s are on the way.

285s + Ray10 for sale local.


Time to start even more cutting

 

This and no looking back!

World of a difference and I just think it's mandatory!

Any mpg loss is worth it.

Air dam delete that is...

 

Just picked up a 2020 grill for a great price. But it looks like the bezel and grill are now one piece instead of two, can anyone confirm?

Edit: looks like that's a yes by looking at the BST forum.

 

Installed a tailgate seal,

$29 ESI Ultimate Tailgate Seal with Taper Seal 10ft for use with Truck Caps and Tonneau Covers

ESI P/N UTGS-10R:



It's the same part sold by Extang as MaxSeal P/N 1140.

 

Slip-on silicone rings for the knobs, totally worth it!

 

Yes! I was also thinking skateboard tape would be cool also...

 

Put my 3D Maxspider mats in the front. The all weather ones that came with it are just too much to keep clean. I like these much more.