Bear(ing) with me, does this seem right?

Hey all,
Im getting set to switch out timing belt et al. and have a concern regarding slight play in the newly acquired idler roller(NSK) and, more so, the tension roller(Koyo) bearings. It's a slight rock in the bearing. Should these things be tight as a drum, no play? Thanks for your time.

 

Mine were tight from a rocking perspective for sure; definitely no play that way. Of course, they spun easily, as good bearings should.

I don't really talk about the condition of the new parts, but here is my write-up of the timing belt work that @drr and I did on our trucks together. Does list all the parts we used, and where we got them (from aircabinman on ebay).

Yes We're Crazy Shop Day: Replacing the Timing Belt (and more) in Two Trucks At the Same Time

​

 

If you think they are bad send them back.

Poor quality things do slip past maybe to long since the last inspector was shot!!

 

You got a wobbly one, return for refund or replacement. Good luck.

 

Thanks for the insight all. Going to get another set. BTW I found the Adventure Taco write up a couple days ago.
Until the next time, Peace.