Dash lights

I need to replace two dash lights in the cluster, what is the best way to remove the cluster to replace burnt out bulbs. Also are the controls on the drives door back lit ? Window and door lock controls. Thanks.

 

I used this write-up to replaced remove my dash to replace a burned out dashlight bulb.
https://www.tacomaworld.com/threads/how-to-dash-trim-removal-1st-gen.528257/
I used the Philips LED 194 bulbs. They are a little pricey, but I didn't want to use a crappy LED bulb that was going to die considering it takes some labor to get in there.

 

I started on the driver's side to the left and below the steering wheel. From there it was kinda like a puzzle. It helps to take pictures just to remind you which parts used what type of fasteners.

 

Classy writeup.

 

Thank guys, are the stock bulbs LED ? Do either one on you know if the driver window and mirror controls are back lit ? Thank again.

 

Stock is incandescent. I avoid LED in the cabin because it gives my girlfriend migraines. Here's a question- how does the dimmer function work when the interior is swapped to LED?

 

I think while I`am in there will change out all the bulbs so the time span having to do it again will or should be alot longer.