2WD Spindle & hub Assy. L/R. Complete. New Koyo Spindle bearings. Sold

Removed from my daily driver truck with no accidents to do my 4WD conversion. (New spindles needed for 4WD) No damage, straight. New Koyo spindle bearings have less than 5000 miles on them. ABS. Left & Right Side. No accidents. Removed from

Note that i do have the spindle backers.

$ Sold

Rather not ship as they are heavy but will on your dime. Located in So. Cal.

This is 2WD only and for 6 lug rims. Pre-runner. Also works for 4Runner.

 

Man I wish you were closer. Really all I need is just the knuckle with out the bearing, rotor, caliper, and ball joint. GLWS

 

Price adjustment. If you are even thinking about a front spindle re-build this will save you money, time and you will get brakes out of the deal.

 

I send you a PM

 

Super cheap here. Someone has to need this

 

I only need calipers...willing to sell separately?

 

Where in SoCal?

 

IM sent to both.

 

Bump to the top. These are complete and ready to run. New Koyo Bearings and include Brembo rotors and pads.

 

Bump to the top. Trades? Reasonable offers? I am sort of surprised i still have these. Guess 2WD spindles do not go out often.

 

Don’t need spindles, but these should work for 2wd & 4wd. I believe the 2wd just have a removable cap where the axle shaft goes into on 4x4 trucks. If you’re interested in selling the calipers+rotors separately shoot me a PM

 

Hi are these spindles still available?

 

Yes they are. I took these off of my truck after replacing the spindle bearings. I ended up converting my truck to 4WD about 6 months after the new bearings were installed. No accidents, ABS.

 

How much for the rotors and brake pads?

 

Price reduction. These need a new home!

 

Are they still available? And if so, would they work on a 4WD truck? I've heard conflicting thoughts

 

Yes but these are for 2WD only. they do not have the spline down the center for the 4WD shaft. Sorry man. These need to go to a 2WD Tacoma or 4Runner who simply has bad wheel bearings.

 

Understood, thanks for explaining that. The search for 4WD non-rusty spindles continues.... Best of luck with selling!

 

Price drop. Would really like to see someone be able to use these.

 

Is the ball joints still good and are they oem? Just had a accident and messed up passenger corner pretty bad.